SUPERLIGHT91 Posted June 3, 2013 Share Posted June 3, 2013 NOW SOLD TO RAMPMONKEY - THANKS FOR THE INTEREST *** REDUCED TO £795 FOR ANYONE THAT CAN COLLECT THIS WEEKEND *** -- or tow it away for £750 if you don't need the tie downs and jerry cans -- Bargain - Can't say Fairer than that. Great 7 trailer on a budget! -------------------------------------------- WILL DELIVER TO M25 South F.O.C - Saturday PM (only) too for anyone that will pay before close of Friday --------------------------------------------- Bradley equipped bespoke Caterham 4-wheel braked trailer with, winch, ramps, 8x spare tyre holder, and jerry carrier, corner straps, etc Supplied with my car this spring, surplus to requirements - clearance bargain! Tows very nicely loaded or empty - a great trailer for someone available at 1/3 of the new build-cost! pics here Caterham 4 wheel trailer useable bed (330x163cm) max usable bed (with tyre rack and jerry can storage removed) (371x165cm) Overall trailer length (470cm) Overall trailer width (just fits in a typical single garage) (216cm) Bespoke custom made trailer to fit a standard Caterham 7 to include: Lockable tyre rack (for carrying upto 8x spares) High-grip tyre bed lift-out galvanised ramps, stow away very neatly & securely Manual loading winch with new web strap Fully braked on all 4 wheels with parking brake Spare full size wheel/tyre 165 R13 4x jack-leg points for optional feet (not included), assist loading the trailer without having it attached to a vehicle Bradley hardware, braked hubs, handbrake, winch, rear and side lighting, just stick your number-plate on the back and its ready for immediate use, recently serviced, freshly painted, and garage stored. The asking price will include: - Brand new set of wheel ratchet tie downs in carry bag – worth £80 - Trailer hitch padlock and key - 2x 30L Jerry cans for carrying fuel - free delivery within 60 miles of Herne Bay, Kent at the weekend (any offers below the asking price will not include the above items, but will be considered, buyer collects) cash on collection, bank transfer or paypal 'gifted' payment. alternatively 10% deposit will hold any first dibs on this trailer for upto 14days to help with collection. Edited by - Superlight91 on 4 Jun 2013 17:53:02 Edited by - Superlight91 on 5 Jun 2013 12:55:10 Edited by - Superlight91 on 5 Jun 2013 12:56:21 Edited by - Superlight91 on 5 Jun 2013 22:43:35 Edited by - Superlight91 on 5 Jun 2013 23:40:10 Edited by - Superlight91 on 6 Jun 2013 12:31:26 Link to comment Share on other sites More sharing options...
Ian B Posted June 3, 2013 Share Posted June 3, 2013 That looks like a bargain Matt, and wouldn't you get an SV on it as well? In which case it may increase the market for it as trailers for SV's aren't easy to come by. Link to comment Share on other sites More sharing options...
Midlifecrisis2001 Posted June 4, 2013 Share Posted June 4, 2013 It looks superb, who made it and could they make a slightly larger one for a similar price? Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted June 4, 2013 Author Share Posted June 4, 2013 I would need to take advice from a SV or CSR owner as to the rear axle width of their cars - and then I can advise whether it will also fit the 163-165cm max bed width. It might be tight though as it was custom made using an S3 as the template with a few inches to spare. Its a great trailer though, well made, and offers reliable 4-wheel towing for less than most other trailers out there. Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted June 4, 2013 Author Share Posted June 4, 2013 as far as I know - it was custom built using all Bradley trailer components by a trailer specialist in Lincolnshire. The garage that supplied my car on the trailer said it cost about £2k to comission & build - I particularly like the ramp stowage, it all works very well for someone needing a trailer on a budget. Link to comment Share on other sites More sharing options...
Ian B Posted June 4, 2013 Share Posted June 4, 2013 My SV measures 1.68m from tyre wall to tyre wall with 6.5" rears. HTH Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted June 4, 2013 Author Share Posted June 4, 2013 Yep - based on that I would say it is too tight for an SV - 1.65 max bed, any more and you will be driving over the tie-down hooks on the side. Of course it could be quite easily adapted, but I think its best to assume this is strictly a trailer for a Series 3 and earlier. Thanks for confirming SV rear axle measurements. Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted June 4, 2013 Author Share Posted June 4, 2013 Thanks Ian - yes it is priced to sell, and open to offers this week (if buyer doesn't need delivery or the optional extras listed). It will do someone a turn, but my property is Canterbury sale is immanent and I loose the spare garage space shortly - so it has to go. I thought i would give first refusal to 7 owners through Blatchat before going for a Pistonheads and ebay ad at the weekend to move it on. May consider useful SWAPs or p/x's to potential buyers: (warning all of the following will sound very Dell-boy) The only sizeable item I'm after is a KTM bike for green-laning, and maybe a Brompton cycle for commuting to work. Some decent MTB's or Road bikes may be considered as I like my cycling., I am also looking for a used Smart Car or Toyota IQ for parking at the office week days. I have a list of bits I could also use for the seven also, such as: - car cover - half hood - half doors - hood bag - tillet tonneau cover - reliable K-series starter motor for my brother's car .... if anyone has any of these surplus to requirements I will discount the price of the trailer in a p/x deal on the trailer. Link to comment Share on other sites More sharing options...
Rullingen Posted June 5, 2013 Share Posted June 5, 2013 With reference to your request for a half hood, which roll bar do you have? Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted June 5, 2013 Author Share Posted June 5, 2013 Half hood will need to fit the current 'X' FIA on a 2009 Superlight - ie the orange car seen on the trailer in the photos. Thanks Link to comment Share on other sites More sharing options...
Rampmonkey Posted June 6, 2013 Share Posted June 6, 2013 How hard and fast is 'collect this weekend'? VERY interested! Drop me a line to discuss! 07841478318 Ta Edited by - Rampmonkey on 6 Jun 2013 11:14:45 Edited by - Rampmonkey on 6 Jun 2013 12:10:09 Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted June 6, 2013 Author Share Posted June 6, 2013 Have emailed you RampMonkey. Collection doesn't have to be this weekend, but I am looking to get someone from the 7 club interested in it with at least a deposit so I know whats happening with it this weekend. Thanks for your interest. Link to comment Share on other sites More sharing options...
SUPERLIGHT91 Posted June 6, 2013 Author Share Posted June 6, 2013 Sold to RampMonkey - thanks for all you all your interest, pleased to hear its going to a good home for a 7 club member to transport to track days Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now