K serie dry sump

[jackb_ms]

Hello All

 

Is there some one around Uxbridge / M40 corridor / Abingdon who has a K series dry sump with a bell tank and swirl tower which I can take pictures of?

 

Cheers

 

Jack

 

Edited by - jackb_ms on 16 May 2013 17:03:56

[Nick Green]

I'm west of Swindon, in Malmesbury if you get no better offer. Or let me know what angles you are after and I can send them to you ?

[jackb_ms]

Hi Nick

 

thank you for your post.

 

What I need is some pictures on how is the pipe from the pump to the tower run and the "slack" in the pipe.

 

Cheers

 

Jack

[Mark w]

jack

Blat mail me and I will reply with some photos

[Mark w]

or you could pop over to Pinner and have a look

 

I am at home at the moment .

[Nick Green]

Ok Jack. I'll see what I can do this evening. I'll send them via BM.

 

Unless you take up Mark's offer

 

Edited by - Nick Green on 17 May 2013 13:54:31

[johnv]

Just to throw another spanner in the works I think that there are 2 different types .. I know that mine is different to Ashley's (AshleyBanks on here) .. his seems droopier than mine (is there any polite way of putting that! ) and on investigation we found that the configurations were different

[Mark w]

I have sent Jack some photos , seems he has the wrong length hose .

 

[jackb_ms]

Thank all

 

It seems that Caterham pipe are too long by about 100mm.

I will send mine to think for it to br trimmed down

 

Jack

[SLR No.77]

Caterham "used" to supply the correct length hose, certainly I've bought a couple over the years and they've been a perfect fit. However following the experiences of another owner who's hose was a similar length to yours, from the subsequent discussions with Caterham it appears nobody at Caterham has a clue what length the correct hose should be. Rather sad really.

 

Stu.