grahamholdstock Posted April 15, 2013 Share Posted April 15, 2013 Have just put my 1.6 k engine back in today and have one wire left over! Schoolboy error i know. It is at back of engine quite long and is brown and red. Just Cannot see where it goes and wondered if anyone has an idea please Graham Holdstock Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted April 15, 2013 Member Share Posted April 15, 2013 Does this thread help? I'm not at home and don't have the diagram with me, but is it loom to starter solenoid? But do check that thread: there's a disagreement about the colour of that lead. Jonathan Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted April 15, 2013 Leadership Team Share Posted April 15, 2013 Brown with a red tracer should have a 90deg female spade on the end and connects to the spade connector on the starter solenoid. Suspect you'll not get far without it! Stu. Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted April 15, 2013 Area Representative Share Posted April 15, 2013 Graham, You'll find the starter motor works better with that brown and red cable connected to the starter motor solenoid Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted April 15, 2013 Leadership Team Share Posted April 15, 2013 Slowcoach Stu. Link to comment Share on other sites More sharing options...
Roger Ford Posted April 15, 2013 Share Posted April 15, 2013 K-Series Wiring Diagram in case you need it in future. Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted April 15, 2013 Area Representative Share Posted April 15, 2013 Stu, Link to comment Share on other sites More sharing options...
grahamholdstock Posted April 16, 2013 Author Share Posted April 16, 2013 Many thanks everyone. Just Couldn't see the connector on the starter motor! Must have been temporary madness. Fitted on now. More progress nearly there Link to comment Share on other sites More sharing options...
grahamholdstock Posted April 18, 2013 Author Share Posted April 18, 2013 Car started first time tonight with DVA kit installed and runs fine. Remap by z and f Saturday. just wanted to thank all here for helping me with advice and to Malcolm Hickey for rescuing me when lug on crank sprocket broke while being removed Thanks again graham h Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now