hugh Posted November 17, 2002 Share Posted November 17, 2002 is an alloy bellhousing available and who supplies /makes them? found serious crack in my old one after refitting the engine Do oh! regards hugh Link to comment Share on other sites More sharing options...
ChrisHawkins Posted November 17, 2002 Share Posted November 17, 2002 have a look at Burton K93 AMJ jetped-boarders.co.uk] Edited by - chrishawkins on 17 Nov 2002 16:01:22 Link to comment Share on other sites More sharing options...
felix.klauser Posted November 17, 2002 Share Posted November 17, 2002 Where did yours crack? Was it the one-piece version (integral spacer) that Caterham used to supply, made by Flowtech? Mine cracked at the upper starter bolt with the crack extending back for about 3 inches. Upon Raceline's advice I replaced it with an ali bellhousing from SPC plus a separate old-style spacer from Caterham. The Flowtech bellhousing is very light but perhaps a bit too thin. I know of several others that cracked similarly. Link to comment Share on other sites More sharing options...
hugh Posted November 22, 2002 Author Share Posted November 22, 2002 thanks for the advice both spc & burton have alloy bellhousings i also saw one in motoring news but i have had bad experiences with buying sight unseen bits before. hugh Link to comment Share on other sites More sharing options...
hugh Posted November 23, 2002 Author Share Posted November 23, 2002 could andy from maidstone ring me on 01634 815347 regards hugh Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now