Racing Snake Posted April 2, 2013 Share Posted April 2, 2013 Why not use the same as me 🤔 Link to comment Share on other sites More sharing options...
Jonathan Kay Posted April 2, 2013 Share Posted April 2, 2013 Quoting Nigel Fox: I don't think it's propylene glycol. According to the info posted by MereCat it's specific heat capacity is around half that of water so wouldn't have the benefits, also it's boiling point and freezing points don't match.Evans quote a working range of -40°C to 180°C and a boiling point at 1 atmosphere of 180°C. The melting point and boiling points of propylene glycol are about -59C and 188.2°C. Am I looking at a different Evans product from the one we're discussing? Jonathan Link to comment Share on other sites More sharing options...
Jonathan Kay Posted April 2, 2013 Share Posted April 2, 2013 Quoting Mad Hatter: It is not Propylene Glycol.That is the safe coolant that is water based. Evans Coolant is not water based.Propylene glycol isn't water-based. You can mix it with water to make a useful engine coolant with good antifreeze performance. Jonathan Link to comment Share on other sites More sharing options...
Racing Snake Posted April 2, 2013 Share Posted April 2, 2013 I can see this going on and on Curious as to why there is no tech info on Evans Coolant listed anywhere Link to comment Share on other sites More sharing options...
Jonathan Kay Posted April 2, 2013 Share Posted April 2, 2013 *arrowup* *arrowup*Me too. Presumably it's because of commercial confidentiality. I hoped I'd be able to find it from the safety sheets but I can't. Would only take about an hour on a GC or TMS to analyse... Jonathan Link to comment Share on other sites More sharing options...
tbird Posted April 2, 2013 Share Posted April 2, 2013 There is an MSDS here still looking for a more current one Tim Link to comment Share on other sites More sharing options...
Jonathan Kay Posted April 2, 2013 Share Posted April 2, 2013 Thanks, Tim. That's for "NPG+" and says Ethylene glycol 66 to 70% Propylene glycol Water <0.10% Proprietary corrosion inhibitor package <2%But the current Evans FAQs include:Is Evans Waterless Coolant toxic? A. No, Evans Waterless Coolants contain Evans patented DeTox™ additive and has been classified as Non-Toxic by an EPA certified laboratory. However as with all chemicals, do not consume. Keep away from children. Avoid contact with eyes and skin. Rinse hands and eyes with water after incedental contact.That non-toxicity isn't compatible with anything containing 66% ethylene gycol. Jonathan Link to comment Share on other sites More sharing options...
tbird Posted April 2, 2013 Share Posted April 2, 2013 Thats what I thought as well, a couple of other boards have Commented on the same thing, what I cannot understand is how they can be selling a product without an MSDS being available, especialy in the states, there seem to be a lot of other people asking whats in it, one guy e-mailed Evans, all be it last year and that's the MSDS he claims to have been sent . more digging required I feel 😬 Tim Link to comment Share on other sites More sharing options...
tbird Posted April 2, 2013 Share Posted April 2, 2013 Jonathan you might find this interesting Making Ethylene Glycol non Toxic Tim Link to comment Share on other sites More sharing options...
Jonathan Kay Posted April 2, 2013 Share Posted April 2, 2013 Yes. I was wondering whether they were adding fomepizole. That's used clinically to slow the metabolism of both ethanol and ethylene glycol. We don't yet know whether that's a better approach than giving ethanol. Jonathan Link to comment Share on other sites More sharing options...
tbird Posted April 2, 2013 Share Posted April 2, 2013 prefer to have the Vodka thank you 😬 Tim Link to comment Share on other sites More sharing options...
Racing Snake Posted April 2, 2013 Share Posted April 2, 2013 Think i am going to stick with the safer propylene glycol Link to comment Share on other sites More sharing options...
tbird Posted April 2, 2013 Share Posted April 2, 2013 probably best not to drink either, Tim Link to comment Share on other sites More sharing options...
NoLimits Posted April 2, 2013 Share Posted April 2, 2013 I have spoken to Evans and they will provide me with a description of the material contents which I will then post here, I don't expect them to provide the full formula as that would obviously be giving away their income. Most of the information you will find will be old information posted in the US many years ago. Yes they did make a product years ago that was to thick to pump around the system - it didn't work. Its no longer sold and was never produced or sold outside of the US. I'll get back to you when I have the info. They are very helpful guys and a British company to all intents and purposes. The US side operates in the US only the guys in Swansea have the product for the rest of the world. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted April 2, 2013 Share Posted April 2, 2013 Thanks. My predictions: 1 They make two types of products, one which is based on propylene glycol and one which is based on a mixture of ethylene glycol and propylene glycol. Both have very low water content. 2 + Corrosion inhibitor 3 + Something like fomepizole to decrease the toxicity of the ethylene glycol 4 + Wetting agent. Jonathan Link to comment Share on other sites More sharing options...
MereCat Posted April 2, 2013 Share Posted April 2, 2013 US patents info I believe.. here Point 5 And here... here I Posted a msds link earlier with latest I could find being 2007. Thanks No Limits for asking. Guess work or old data can cause confusion...it's all good press for them though Link to comment Share on other sites More sharing options...
CaterBram Posted April 3, 2013 Author Share Posted April 3, 2013 So after a heavy day of running, especially towards the end with almost back to back runs got to say i'm happy. On my early runs when there was greater gap between runs, initial water temp - 80 initial oil temp - 90 final water temp - 90 final oil temp - 100 to 105. Later runs with little interval between initial water temp - 80, initial oil temp 100 final water temp - 90, final water temp 110 normally at Curborough I would have expected to have gradually built the temp until peaking at 120 after a number of runs with only short intervals. Each time both the water & oil temps came down more quickly than on other equally cool days. you may not be convinced, but at present I am, I will be monitoring through the season and will be paying close attention to water and oil temps at the longer venue's. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted April 3, 2013 Share Posted April 3, 2013 Quoting CaterBram Jnr: A normal run at Curb's starting with water at 80 & oil at 90 will see the oil peak at around the 115 mark over the finish line with water around 90.Thanks for the follow-up data. What was the ambient temperature on the two days? How are you measuring the temperatures? Jonathan Link to comment Share on other sites More sharing options...
CaterBram Posted April 3, 2013 Author Share Posted April 3, 2013 Ambient yesterday was around 5 Deg C, similar to the same time last year. Temperature measure on a long scale Stack temperature guage with seperate probes for oil & water temp. Water temp measured is INLET water temperature to the engine. Link to comment Share on other sites More sharing options...
NoLimits Posted April 3, 2013 Share Posted April 3, 2013 Link to comment Share on other sites More sharing options...
Jonathan Kay Posted April 3, 2013 Share Posted April 3, 2013 Why are the temperature readings rounded to 5°C? Jonathan Link to comment Share on other sites More sharing options...
CaterBram Posted April 3, 2013 Author Share Posted April 3, 2013 There not rounded. It was just one of those 5 a day days I suppose Link to comment Share on other sites More sharing options...
Croc Posted April 4, 2013 Share Posted April 4, 2013 Quoting CaterBram Jnr: Later runs with little interval between initial water temp - 80, initial oil temp 100 final water temp - 90, final water temp 110 normally at Curborough I would have expected to have gradually built the temp until peaking at 120 after a number of runs with only short intervals. This is a really interesting thread - To help me interpret the results I just want to confirm on a before (regular coolant) and after (Evans) basis that water temp seems to be about where you were before but oil temp peak seems to have come down 5 degrees on the later runs? What engine spec are you running to give me a guide here? My experience in a non-competition environment on my prior seven (2004 SV St170 zetec which ran at 90 deg water and 115 deg oil at its normal operating temperature with high speed runs spiking the oil up to 120 deg) was not to see any pronounced change in water/oil temps from using Evans other than slowing the intervals that the water thermostat/fan kicked in (so more efficient cooling there). Like you I was hoping to avoid installing an oil cooler on the zetec but Evans did not deliver the result I wanted. It was for this reason I have not bothered to use Evans in my current CSR Duratec which runs oil at 120deg on track despite having an oil cooler. I am intrigued to see it impact your oil temp so much. Edited by - Croc on 4 Apr 2013 09:45:17 Link to comment Share on other sites More sharing options...
NoLimits Posted April 4, 2013 Share Posted April 4, 2013 The results reflect my post of what should happen. Coolant would remain the same as the thermostat has an influence. Actual engine temp is lower (reflected by the oil temp) as the Evans has better coolant properties at high temps near the liners etc. It remains in contact with all surfaces and doesn't boil. Link to comment Share on other sites More sharing options...
Surreptitious Posted April 4, 2013 Share Posted April 4, 2013 To give as much info to this thread as available, this competitor's web site had the following document on the Evans product. Don't shoot the messenger ☹️ No-Rosion Evans Test Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now