Neil F Posted March 28, 2013 Share Posted March 28, 2013 I'm after the 2 knee plates that sit at the bottom corners of the dash for my 2003 car. I'm starting to give up on finding a carbon dash as Caterham don't sell them anymore and I twice missed out on buying a NOS one by the skin of my teeth but if someone has one going I'm interested in that too/instead of! Holes for gauges please not Stack... Neil Link to comment Share on other sites More sharing options...
Pendennis Posted March 29, 2013 Share Posted March 29, 2013 What do these look like? I may have these siiting in a box in the loft Link to comment Share on other sites More sharing options...
Neil F Posted March 29, 2013 Author Share Posted March 29, 2013 Thanks Pendennis. This is the current Caterham item (they don't fit imperial chassis apparently) here Neil Edited by - Neil F on 29 Mar 2013 12:03:46 Edited by - Neil F on 29 Mar 2013 12:04:39 Edited by - Neil F on 29 Mar 2013 13:45:10 Link to comment Share on other sites More sharing options...
Pendennis Posted March 29, 2013 Share Posted March 29, 2013 Link does not work Neil, email me and I take some photo's of what I have for you durabang@sky.com Ian Link to comment Share on other sites More sharing options...
Mankee Posted March 29, 2013 Share Posted March 29, 2013 This is what Neil means, Ian: http://www.caterhamparts.co.uk/product.php?id_product=2246 Link to comment Share on other sites More sharing options...
Lee Fowler Posted March 29, 2013 Share Posted March 29, 2013 I just made mine from Carbon sheet. Lee Link to comment Share on other sites More sharing options...
Neil F Posted March 29, 2013 Author Share Posted March 29, 2013 Can't seem to get the link to work yes that's the one thanks Mankee! Link to comment Share on other sites More sharing options...
Neil F Posted March 29, 2013 Author Share Posted March 29, 2013 Right link working (for what its worth...). Lee, I have never worked with carbon sheet before. How do you form the curves; does it respond to heat? Still what the knee plates by the way Pendennis! Neil Link to comment Share on other sites More sharing options...
Pendennis Posted March 29, 2013 Share Posted March 29, 2013 Yes that is what I have, though LH and RH thus a pair. I sent a photo to you Neil. Link to comment Share on other sites More sharing options...
Lee Fowler Posted March 29, 2013 Share Posted March 29, 2013 I think I used 0.5mm sheet which is very flexible. Lee Link to comment Share on other sites More sharing options...
Neil F Posted March 30, 2013 Author Share Posted March 30, 2013 Thanks guys,looks like I'm tracking down the bits that I need! Lee - Did you put the carbon over the ally dash or use it as the dash itself? Neil Link to comment Share on other sites More sharing options...
Lee Fowler Posted March 30, 2013 Share Posted March 30, 2013 I replaced the dash with a carbon one and then used sheet carbon for the knee parts. Lee Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now