Clay Head Posted November 12, 2002 Share Posted November 12, 2002 Wanted for crossflow to T9 box. Any one selling? Link to comment Share on other sites More sharing options...
Tight fart Posted November 12, 2002 Share Posted November 12, 2002 If 2 turn up, I'll have one. T.F@O.F. www.griptv.com Link to comment Share on other sites More sharing options...
paul jacobs Posted November 12, 2002 Share Posted November 12, 2002 I do have a spare one, but I really don't have a clue what it's worth [oh, all right then, I have an idea, but it may be a lot less than either of you want to pay], so what is it worth to you? Very good condition with no cracks natch. Link to comment Share on other sites More sharing options...
Clay Head Posted November 12, 2002 Author Share Posted November 12, 2002 Paul, If its in good solid condition does £50 sound fair? Link to comment Share on other sites More sharing options...
paul jacobs Posted November 13, 2002 Share Posted November 13, 2002 Would £100:00 be out of the question? Given the comparable S/H cost of, say, K series or Vx bellhousings? Red 245bhp Vauxhall powered 21-Now sold, back in the fold with my new 1600K Seven Link to comment Share on other sites More sharing options...
Clay Head Posted November 13, 2002 Author Share Posted November 13, 2002 Paul, Thats a bit more than I had budgeted to. I could Stretch to £80 and collect it to save postage ( Itravel around the country a lot with work). Any good? Tim Edited by - clay head on 13 Nov 2002 21:31:46 Link to comment Share on other sites More sharing options...
paul jacobs Posted November 15, 2002 Share Posted November 15, 2002 £80 sounds fine to me, I'll drag it out of the loft and check that it really is 100%. It's been there for about 4-5 years since I stopped playing with crossflows. I live just outside Taunton, so I'm quite happy to hang on to it till you get down here. Link to comment Share on other sites More sharing options...
Clay Head Posted November 17, 2002 Author Share Posted November 17, 2002 Okay that sounds good. Can you drop me a line with your address and tel number to tr.moore@ntlworld.com. I'll give you a shout when I'm around you area. Favourite is 10th Dec at the minute as I am going to Truro so could divert. Cheers Link to comment Share on other sites More sharing options...
philwaters Posted November 18, 2002 Share Posted November 18, 2002 Just to make a note. I found The Escort Agency pretty useful for this sort of thing. I got my RS2000 clutch arm from them and they have B/housings in. Have a look at http://www.theescortagency.plus.com/index.htm or call 01834 860929 Phil Waters You mean you can drive these? I thought it was just there to polish 😬 Link to comment Share on other sites More sharing options...
Tight fart Posted November 18, 2002 Share Posted November 18, 2002 I am still looking for one, (crossflow to t9) what would this have been fitted to? T.F@O.F. www.griptv.com Link to comment Share on other sites More sharing options...
philwaters Posted November 19, 2002 Share Posted November 19, 2002 You'll want an RS2000 one - that is what I used to replace my x/flow to T9 one. It will fit straight in if you have an earlier chassis with the 'Y' frames in front of the drivers footwell. If you have the single tube, like I do, then you will need to hacksaw off the spare starter motor housing and can make up a small plate to cover it and keep dirt out. I can send you some pictures if you like - might need re-scanning. Phil Waters You mean you can drive these? I thought it was just there to polish 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now