Matthew Wheatley Posted November 11, 2002 Share Posted November 11, 2002 Apologies for covering VERY old ground but I've searched the archives and can't find a definitive answer so: When should I check the oil level of my standard K series 1.4 ss? Before starting or when the engine and oil are all warrmed up? I've tried doing both and at the moment when it's cold it reads just over the High and when it's warmed up it reads under the Low marker. help. thank, Mat Link to comment Share on other sites More sharing options...
Paul McKenzie Posted November 11, 2002 Share Posted November 11, 2002 Mat, Cold if it's wet sump Paul Link to comment Share on other sites More sharing options...
Matthew Wheatley Posted November 11, 2002 Author Share Posted November 11, 2002 Thanks. Link to comment Share on other sites More sharing options...
Paul Richards. Posted November 11, 2002 Share Posted November 11, 2002 K series engine should have oil checked at normal operating temperature and when engine is running - as per build manual. I must confess I always find it difficult to read level properly on dipstick. Do be careful not to overfill. Â Paul R. C7PPR K series that starts when hot!! Link to comment Share on other sites More sharing options...
Paul McKenzie Posted November 11, 2002 Share Posted November 11, 2002 Paul, Rubbish!! If the build manual says that for a wet-sump engine, then it's wrong. What possible reason could you have for checking oil level when the damned thing is running and throwing oil in every direction? The only way to check level is correct must be static in a wet-sump engine. Paul Link to comment Share on other sites More sharing options...
CHRIS CLARK Posted November 11, 2002 Share Posted November 11, 2002 ................................. unless it has an Apollo fitted in which case it's with the engine running as the tank empties back to the sump & gives very false readings!!! Link to comment Share on other sites More sharing options...
CHRIS CLARK Posted November 11, 2002 Share Posted November 11, 2002 😳 Edited by - chris clark on 11 Nov 2002 21:08:26 Link to comment Share on other sites More sharing options...
mav Posted November 11, 2002 Share Posted November 11, 2002 I have to say when I collected my 1.6ss with no appollo it had a plate on top of the cam pulley cover saying : check oil level with engine running and hot. So. whats it to be?? PS. I've had an appollo on it since 4 weeks after i got it Link to comment Share on other sites More sharing options...
Emmanuel Posted November 11, 2002 Share Posted November 11, 2002 Hi, I have exactly the same question as on my 1,6 K serie engine, it is also written ''check oil while engine hot and running''. The engine is the standart 1,6 K engine in a Caterham built in 2001... As I found that strange, I discuss with the former owner and he replied: ''well you know English cars are often very strange..." 😬 Link to comment Share on other sites More sharing options...
alicat Posted November 11, 2002 Share Posted November 11, 2002 Gents Do we have a definative answer yet 🤔 🤔 I would like to know so that I am sure that I am also doing the right thing - currently cold, engine not running  Also a 1.4ss Thanks Tony  Link to comment Share on other sites More sharing options...
Emmanuel Posted November 11, 2002 Share Posted November 11, 2002 May be checking oil on runing engine is due to the crankcase foam Link to comment Share on other sites More sharing options...
Matthew Wheatley Posted November 12, 2002 Author Share Posted November 12, 2002 Dam, Post question yesterday, check an hour later and see a nice easy answer. Come back today to see if theres anything new on tech talk and I see people have gone and disagreed!   Link to comment Share on other sites More sharing options...
Emmanuel Posted November 12, 2002 Share Posted November 12, 2002 What is surprising Matthew is that, with my car, I do not have any difference in the level when I check it on cold engine or engine hot and running... Link to comment Share on other sites More sharing options...
Matthew Wheatley Posted November 12, 2002 Author Share Posted November 12, 2002 What engine do you have? Link to comment Share on other sites More sharing options...
Emmanuel Posted November 12, 2002 Share Posted November 12, 2002 I have the 1,6 K ... in the original configuration... Discussing about the same thing on a french forum, some other people have the same plate ''check oil....hot and running'' both on 1,6 K and on 1,8 VVC and any other one didn't have this plate on the same Rover K engines... But may be older ones... What I know is that there has been a change in the crankcases, a first generation being labeled CATERHAM/ROVER and a second generation being labeled CATERHAM... May be with the new one you have to check oil on running engine... Did you ask a Rover dealer to know if this is specific to Caterham??? Link to comment Share on other sites More sharing options...
CHRIS CLARK Posted November 12, 2002 Share Posted November 12, 2002 When I ran a 1.4SS I saw these plates at Caterham parts and bought one. Stuck it onto the cam cover as the others have 'em fitted. I think it may also be that the 'K' series when fitted at the slight incline that they are in a Caterham trap some oil in the head which does drain down but not that quickly. Checking levels when warm & running etc has the engine in 'as operating' condition and gives a true level as opposed to the 'all-drained-down' scenario  Well it never did my 1400SS any harm. It had 133BHP (Rolling Road tested) after 38,000 miles. 😬 Clamshell Club Founder Member. Link to comment Share on other sites More sharing options...
mav Posted November 12, 2002 Share Posted November 12, 2002 I always do the hot and running, and did so before the appollo was fitted. Best advise I can give is call Simon Lambert on 01322625804 and ask him. Regards, Martin Link to comment Share on other sites More sharing options...
Nifty Posted November 12, 2002 Share Posted November 12, 2002 I asked him this a few months back and he told me start engine let it run 30secs+ then check. Reason is something to do with the hydraulic valvetrain. Link to comment Share on other sites More sharing options...
Paul Richards. Posted November 13, 2002 Share Posted November 13, 2002 I always understood that because of the shortened sump on the K series that the engine should be running and warm to ensure that some of the oil is distributed around various parts of the engine (inc. hydraulic tappets). You are then measuring oil which remains in the sump. Presumably if you dip when not running it will read high. Paul McK - Dipping oil when cold and stationary is probably fine for old fashioned Vauxhalls, but we're talking high tech state of the art K series here!!!! 😬 😬 I must say that it is difficult to read the dipstick correctly when oil is splashing around the sump. . I hope this thread will produce a better way of oil checking as I've overfilled in the past and at high speed it causes worrying smoke 😳 😳 😳 Paul R. C7PPR K series that starts when hot!! Link to comment Share on other sites More sharing options...
Paul McKenzie Posted November 13, 2002 Share Posted November 13, 2002 Paul, Cheeky git Paul Link to comment Share on other sites More sharing options...
prs Posted November 13, 2002 Share Posted November 13, 2002 I've always checked when hot and running on my 1.6SS as per instructions in the good old owners manual! Basically you could take a reading with the engine off once you've got the right level and put a slight nick in the dippy thingy a couple of mill above the full mark 😬 😬 😬 Link to comment Share on other sites More sharing options...
Nifty Posted November 13, 2002 Share Posted November 13, 2002 PRS, Exactly what I actually do most of the time, occassionally doing a confirmation running check  Nifty. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now