Dirty Den Posted November 8, 2002 Share Posted November 8, 2002 I've checked my build manual and it says to use NGK BP7ES plugs for my Sprint. Are these the accepted plug still to use, or should I be looking for something else tomorrow?  Can anyone also tell me what I should set the gap to on the plugs - or are they likely to come preset? Cheers, Den 😬 - Self portrait - still unable to remove the smile! Link to comment Share on other sites More sharing options...
Gavin Posted November 9, 2002 Share Posted November 9, 2002 NGK BP7ES all day for 1600 sprint engine, cheap and readily available. Can't remember the gap exactly although .26mm springs to mind. Link to comment Share on other sites More sharing options...
John E Posted November 9, 2002 Share Posted November 9, 2002 BP7ES with a gap of .025thou, not .026mm. I think that .25thou equates to .6mm Run Baby Run Link to comment Share on other sites More sharing options...
Gavin Posted November 9, 2002 Share Posted November 9, 2002 Oops ! Link to comment Share on other sites More sharing options...
Dirty Den Posted November 9, 2002 Author Share Posted November 9, 2002 Thanks chaps...  Den 😬 - Self portrait - still unable to remove the smile! Link to comment Share on other sites More sharing options...
eric Posted November 9, 2002 Share Posted November 9, 2002 NGK BP7ES is really the best. I have tried Champion N6YCC not so good and NGK BP7EVX platinium ones, not convinced they foul in heavy traffic If it can help Link to comment Share on other sites More sharing options...
Dirty Den Posted November 10, 2002 Author Share Posted November 10, 2002 Cheers Eric. Den 😬 - Self portrait - still unable to remove the smile! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now