Phil Posted October 14, 2012 Share Posted October 14, 2012 On a 1990 dd chassis with the fixed top link cruciform profile style, would it be possible to change to the other style tubular top link on this page [link below] and have it extended while using the wide track lower link from a later car to go wide track? top link Link to comment Share on other sites More sharing options...
Eugene Posted October 15, 2012 Share Posted October 15, 2012 Not sure if it helps, but Eugene is 1983, and is now widetrack... Initially went for the later triangulated top link, and then full wide track. Link to comment Share on other sites More sharing options...
jonboylaw Posted October 16, 2012 Share Posted October 16, 2012 Yes, it is possible but you will need to remove the front bush mount for the bottom wishbone. This was modified to be a captive bush and bolt in later WBs. There is a kit to convert the top link to wishbone that you will need to use for anchoring the front of the new top wishbone. If you are running vertical links with trunnions, then you will need to buy new ones that are trunnionless to fit the later bottom WT wishbones. Canely Classics were cheapest when I did this here. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now