Weber linkage return spring

[Tyrone]

Has anyone got a photo showing the relationship between the DCOE linkage, the spring and the Caterham Y bracket under the carbs.

 

I took my carbs off to replace burnt out wiring and when I put everything back I can't seem to fit the spring in a position where it works or where it doesn't foul the throttle cable.

[kenny.]

Do you mean this return spring?

 

 

http://i416.photobucket.com/albums/pp243/lotusman/IMG_0964_zps10f6266b.jpg

[Tyrone]

Yes, that's the one. It's not the clearest picture though Kenny, so it isn't helping! 😬

 

I've just read some old threads on the internal spring failures. If I change to 2 external springs I assume the linkage spring is retained? Pictures of that set up would be appreciated too.

[kenny.]

Quoting Tyrone: 

Yes, that's the one. It's not the clearest picture though Kenny, so it isn't helping! 😬

 

Ungrateful twunt 😬

[Tyrone]

That's me!

[jonboylaw]

This one may help a little if you can zoom in a bit.

 

here

 

http://thumb0.webshots.net/t/96/96/8/60/29/2197860290103159900YBMDBt_th.jpg

 

 

[Tyrone]

Thanks Jonathan, there are a couple of photos there which help. For some reason my Y bracket is very close to the chassis rail and I think I've put the spring in upside down. Back in the garage tomorrow then.