K-series Scholar 1900 bottom end

[Shaun_E]

Complete 1900cc K-series bottom end. Scholar 1900 block, single tang rods, forged Pistal pistons. All components were balanced at Vibration Free. £650

This was the bottom end of my old 226 bhp engine. It's done about 20k miles and 4 seasons of sprinting but is in excellent condition. The big end bearings have been replaced as a precaution but the old ones were in perfect condition.

Also available and currently attached is a lightweight flywheel. This is the one that was fitted to the early Superlights. It is slightly heavier than the R500 flywheel but much lighter than standard. £150 - first dibs to whoever buys the bottom end as it was also balanced with the rest of the components.

[Golf Juliet Tango]

Dutchy was looking for one

[K16TOY]

Hi Shaun,

 

Can I have first dibs subject to confirming later please.

 

Nathan

[Fishy Dave]

2nd dibs here please

[Shaun_E]

There is lots of interest in this - some came in by email so to try to be fair I've gone in order of time received (email or BC post).

It's now sold but if for some reason the buyer changes his mind I'll contact in order:

Nathan

Fishy Dave

Bricol

 

Thanks,

Shaun