Parts for Hayabusa conversion.

[DSL]

Ideally as a package for someone embarking on building a race / sprint / hillclimb Busa with a view to winning

 

Very little used ultimate spec 1397cc Mistral built Hayabusa engine, this motor gives 200.1 rear wheel BHP at 11,00rpm on Powertec's dyno. This is a good 15-20bhp up the usual output of a tuned 1397cc motor. Engine built with big valve head / expensive tall 5th & 6th gear ratio's / Mistral special hard faced cams etc etc.

 

£6500.

 

SBD Hayabusa complete dry sump system. (Including tank, but may need to be modified & or replaced as was from my Radical rather than 7) ****SOLD*****

 

SBD Hydraulic clutch kit (New, never used). £125

 

Hayabusa big bore throttle bodies, bored out by Powertec (45mm from memory) same as used on all the big bore & stroked RPE / Powertec high spec engines including injector leads to suit MBE loom . £350 ****SOLD****

 

High pressure adjustable fuel regulator. ****SOLD****

 

MBE 992 ECU £275

 

Force racing custom exhaust manifold incorporating 100 cell racing CAT (Just add silencer) ****SOLD****

 

Busa gear lever mechanism including all push rods (not crappy teliflex cable) & bell cranks to suit. ****SOLD****

 

3.38 Ford diff built by Road & Race transmissions & fitted with the excellent ZF LSD. £1250

 

Just remembered I also have a Quickshift load cell fitted on the gear lever (allows full throttle upshifts) £50

 

NOW PRICED INDIVIDUALLY AS SOME ITEMS ARE NOW SOLD

 

 

 

 

 

Edited by - dsl on 9 Sep 2012 20:38:59

 

Edited by - dsl on 10 Sep 2012 08:36:18

 

Edited by - dsl on 29 Sep 2012 23:07:13

 

Edited by - dsl on 1 Oct 2012 11:09:05

[DSL]

If you twisted my arm I could also include a complete set of engine mounts to install it with too

[DSL]

Updated as some items now sold