keybaud Posted September 7, 2012 Share Posted September 7, 2012 I need to sell the carburettor setup that I've just replaced. I'm going to list all the items, but I'd prefer to see if anyone wants all of it as a full kit before I sell the items individually. The items that I have are as follows: Caterham VX DCOE Inlet Manifold (C20XE) - £150.00 Redline Carb to Manifold Seals - free with carbs Matched pair of Weber 48 Carburettors - £500.00 Throttle Position Sensor - £50.00 Facet Solid State Fuel Pump - £15.00 Sytec Fuel Pressure Regulator - £10.00 MBE967IG ECU and Relay - £300.00 Loom for MBE 967IG with TPS addition - £100.00 ITG Filter backing Plate and ITG Filter (rounded with no visible external frame) - £60.00 Other items that will be available, but are not necessatily of much value are: S3 Bag tank and tank housing (old, but fully functional) - £60.00 Braided fuel hose from tank to fuel pump at rear of car (AN6 to AN6) Braided fuel hose from rear of car to fuel rail (AN6 to normal hose end) If anyone is doing a serious conversion, I've also got a low mileage (<20,000) c20XE block, but no cylinder head. It was previously mapped at 190 bhp on the Weber 48s with a standard head. /Edit Added ITG AIr Filter details and listed prices for most components. Edited by - keybaud on 9 Sep 2012 10:24:06 Link to comment Share on other sites More sharing options...
Lee Fowler Posted September 7, 2012 Share Posted September 7, 2012 If you decide to split 1st dibs on manifold. Lee Link to comment Share on other sites More sharing options...
DaveMorris Posted September 7, 2012 Share Posted September 7, 2012 Interested in the fuel lines - can you BM me some idea of how much you'd want (+ length of each bit 😬) tx, Dave Link to comment Share on other sites More sharing options...
Tyrone Posted September 7, 2012 Share Posted September 7, 2012 Si, You might have a better chance of selling everything as individual items. I haven't seen any photos of the conversion. Link to comment Share on other sites More sharing options...
Ed White Posted September 8, 2012 Share Posted September 8, 2012 Price on the tank please? Thanks, ed Link to comment Share on other sites More sharing options...
keybaud Posted September 9, 2012 Author Share Posted September 9, 2012 Updated original post with ITG Air Filter details and added prices. Edited by - keybaud on 9 Sep 2012 10:24:12 Link to comment Share on other sites More sharing options...
Don Cook Posted September 9, 2012 Share Posted September 9, 2012 Hello, Do you have any info about the map in the ECU? Cheers, Don. Link to comment Share on other sites More sharing options...
keybaud Posted October 12, 2012 Author Share Posted October 12, 2012 Quoting Don Cook: Hello, Do you have any info about the map in the ECU? Cheers, Don. Apologies for the delay in replying. The map is for the Weber 48s on a C20XE with a ported head. It was 210 bhp at the last rolling road session. I have the cable and software as well. Edited by - keybaud on 12 Oct 2012 13:35:36 Link to comment Share on other sites More sharing options...
keybaud Posted October 12, 2012 Author Share Posted October 12, 2012 As per my Throttle Body post, I'm going to put everything on Ebay later, but if anyone is interested in any individual items, let me know. I'm open to discussions about prices. Link to comment Share on other sites More sharing options...
johnnyseven Posted October 12, 2012 Share Posted October 12, 2012 Yhm Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now