Jonathan Kay Posted August 11, 2013 Author Share Posted August 11, 2013 ... so far it's been cash only, but I'll think about it. ;-) Jonathan Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 19, 2013 Author Share Posted August 19, 2013 ... and that's the last of that batch sent. Next batch: Predicted cost is £11.24 for one, £17.04 for two, but we might get hit for import duty which would put it up a bit. Batch size will be 30, and I have 13 outstanding requests so far. Jonathan Link to comment Share on other sites More sharing options...
JonL Posted August 19, 2013 Share Posted August 19, 2013 I'll take two please. Let me know if you want any further info (or payment) prior to you placing the order. I appreciate that you have no idea who I am apart from a 7 owner (which is hardly a glowing reference!) Jon Edited by - JonL on 19 Aug 2013 13:37:23 Link to comment Share on other sites More sharing options...
Blokko Posted August 26, 2013 Share Posted August 26, 2013 Hi Jonathan This has jut been bought to my attention - I'm not normally one to lurk in the Bulk Buy area 😬 Anyhow, would be interested in taking 4 units please Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 27, 2013 Author Share Posted August 27, 2013 Four? Planning a trip to Peru in a 7? :-) That's about 17. If the new builders "integrated" this with their assembly that would get us close enough to 30 for me to order the next batch. Jonathan Link to comment Share on other sites More sharing options...
BigCol Posted August 27, 2013 Share Posted August 27, 2013 two for me too please Jonathan... (so 11 to go to reach the target of 30) Link to comment Share on other sites More sharing options...
ChrisGillard Posted August 27, 2013 Share Posted August 27, 2013 Hi Jonathan, My 2 arrived a few days ago, very nice. Thank you. Chris Link to comment Share on other sites More sharing options...
Blokko Posted August 27, 2013 Share Posted August 27, 2013 Quoting Jonathan Kay: Four? Planning a trip to Peru in a 7? Not quite - planning to use 2 on the 7. But with a heater and an Apollo on this car I'm going to have to think carefully where to place them. At least one will go in the boot to hold tyre weld and a few tools.... Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 27, 2013 Author Share Posted August 27, 2013 I was thinking of the marching powder... It would be great to see more photos of where and how people have fitted them. Jonathan Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 29, 2013 Author Share Posted August 29, 2013 Next batch of 30 ordered from China. Jonathan Link to comment Share on other sites More sharing options...
Foggy Posted August 30, 2013 Share Posted August 30, 2013 If it's not to late, could I have one please? Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 30, 2013 Author Share Posted August 30, 2013 That's about 25 allocated of of the next batch of 30. Jonathan Link to comment Share on other sites More sharing options...
Andy Lef Posted September 2, 2013 Share Posted September 2, 2013 Jonathan I'm in for 3 please - not going as far as Peru I'll BM my details for when you want money etc. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted September 2, 2013 Author Share Posted September 2, 2013 ... making 30, if I've added up correctly. Jonathan Link to comment Share on other sites More sharing options...
Willie. Posted September 2, 2013 Share Posted September 2, 2013 I mounted mine (K Series), 2 vertically infront of engine offset to passenger side. Alloy bracket to hold them and jubilee clip to bottom chassis cross tube. So behind steering rack, nice and low and in rad airflow...so spare oil sits at very near engine temp (ideal for hot topping up). Third is just cable tied on at an angle from drivers side headlamp bracket towards header tank. I have pics I can upload at the weekend if anyone is thinking of similar. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted September 4, 2013 Author Share Posted September 4, 2013 *arrowup* *arrowup*Photos please, Willie. Thanks Jonathan Link to comment Share on other sites More sharing options...
Jonathan Kay Posted September 4, 2013 Author Share Posted September 4, 2013 They've left Qingdao and are now in Weifang. At least I don't have to GoogleTranslate the tracking page from Mandarin anymore. Jonathan Link to comment Share on other sites More sharing options...
Jonathan Kay Posted September 11, 2013 Author Share Posted September 11, 2013 They've arrived. Costs for this batch were: £175.60 for 30 = £5.86 Envelope £0.24 whether it's for one or two Postage £5.20 whether it's for one or two Total £11.30 for one Total £17.16 for two Total £28.46 for three Total £34.32 for four Please can everyone who expressed an interest either in this thread or directly send me a BlatMail with the delivery address. I'll then reply with the details for the bank transfer. Jonathan Link to comment Share on other sites More sharing options...
Jonathan Kay Posted September 12, 2013 Author Share Posted September 12, 2013 Gregs79: Thanks for the BlatMails. There's a problem with the reply-to email address that I'm getting. Please send me another with the email address you'd like me to use in the body of the BlatMail. Thanks Jonathan Link to comment Share on other sites More sharing options...
Mike Guest Posted September 14, 2013 Share Posted September 14, 2013 Jonathan, I haven't ordered one out of this batch but if a spare is available put me down for it. Thanks. Mike Link to comment Share on other sites More sharing options...
Jonathan Kay Posted September 15, 2013 Author Share Posted September 15, 2013 First reminder for those who asked for one on or before 1 September 2013 and haven't sent me a BlatMail with a delivery address. Jonathan Link to comment Share on other sites More sharing options...
Blokko Posted September 15, 2013 Share Posted September 15, 2013 Hi Jonathan Tried to set up payment, but currently at a location in Scotland where I can get either a wifi connection or mobile reception, but not both simultaneously - so as a result I can't sort out payment Back home tonight - will sort out payment and delivery details as soon as I get back.... Link to comment Share on other sites More sharing options...
Guest Posted September 15, 2013 Share Posted September 15, 2013 If there's any spare I'll buy them :) Link to comment Share on other sites More sharing options...
Jonathan Kay Posted September 15, 2013 Author Share Posted September 15, 2013 There won't be any spares from this batch. but we're already building up nicely towards the next. Keep the requests coming. The man in China who makes them has asked if anyone would be interested in matching P-clamps... Jonathan Link to comment Share on other sites More sharing options...
Gregs79 Posted September 15, 2013 Share Posted September 15, 2013 Could be interesting. Can the supplier send any photos? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now