andyseven Posted July 5, 2012 Share Posted July 5, 2012 Hi, only small niggle, but has anyone any ideas on this? Oil Temp guage on dash steams up after 5 minutes. As I say only small niggle, but this is a new car. Dash is modular type - will the glass cover 'pop off'? don't want to force it. Thanks Andy Link to comment Share on other sites More sharing options...
charlie_pank Posted July 5, 2012 Share Posted July 5, 2012 I think there was an article a LONG time ago in low flying about putting a tiny drain-hole at the lowest point on the back of the gauge to let the gauge 'breathe' Link to comment Share on other sites More sharing options...
makingff Posted July 5, 2012 Share Posted July 5, 2012 Search through the archive, I'm pretty sure there is a 'mod' that you can do to which involves drilling a small hole. Simon Link to comment Share on other sites More sharing options...
makingff Posted July 5, 2012 Share Posted July 5, 2012 Too slow... Simon Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted July 5, 2012 Share Posted July 5, 2012 Or safer - using a hacksaw blade to cut a small slot in the casing, rather than having the drill break through and pierce the internal gubbins ! Link to comment Share on other sites More sharing options...
Barry Posted July 5, 2012 Share Posted July 5, 2012 This any help? FAQ: How Do I Stop My Gauges From Misting Up Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now