Grubbster Posted July 1, 2012 Share Posted July 1, 2012 Been on my car for a couple of years, I just swapped over to the standard CC one as I am considering fitting an extra silencer across the rear and the Freestyle ARB would be in the way. It is complete and in good condition, the droplinks rattle a bit (TADTS I believe?) and powdercoat lifting a little. Looking for £90. Link to comment Share on other sites More sharing options...
Richard K Posted July 1, 2012 Share Posted July 1, 2012 Hi, Can I have first dibs. Will it fit an 'early' DD car? 1989 Richard Link to comment Share on other sites More sharing options...
Grubbster Posted July 1, 2012 Author Share Posted July 1, 2012 Hi Richard, I've just taken a picture under my [dirty] car, in the middle you can see the black mounting point with 3 holes in - if your car has these then I should think it would fit. Link to comment Share on other sites More sharing options...
jackb_ms Posted July 1, 2012 Share Posted July 1, 2012 i'm interested also if it fits an S3 chassis imperial Jack Link to comment Share on other sites More sharing options...
Grubbster Posted July 1, 2012 Author Share Posted July 1, 2012 It has been removed from my 2003 imperial chassis car Link to comment Share on other sites More sharing options...
Richard K Posted July 1, 2012 Share Posted July 1, 2012 Just checked and my car has similar plate but only two holes ? Do you know if it is important that there should be three. Richard Link to comment Share on other sites More sharing options...
Grubbster Posted July 1, 2012 Author Share Posted July 1, 2012 No, only the outer 2 are used, they are 30mm between centres Link to comment Share on other sites More sharing options...
Richard K Posted July 2, 2012 Share Posted July 2, 2012 Hi Grubbster. looking again at the pic. I think the plate on my car if a different location. When I was looking for a anti roll bar earlier, I contacted Redline and they said that the bar for my age of car has been made for some time. I'll have to pass. Over to you Jack Richard Link to comment Share on other sites More sharing options...
jackb_ms Posted July 2, 2012 Share Posted July 2, 2012 I don't have this plate... Just two holes in the chassis in front of the back wheels. Does that mean I fon't fit? Jack Link to comment Share on other sites More sharing options...
jackb_ms Posted July 2, 2012 Share Posted July 2, 2012 I'm just checking with people with more knowledge if it would fit a 21 Jack Link to comment Share on other sites More sharing options...
Grubbster Posted July 2, 2012 Author Share Posted July 2, 2012 The holes in the chassis in front of the rear wheels is where the std CC antiroll bar fits, not sure what these brackets are originally intended for but Freestyle utilised them for this type of antiroll bar and so do Powerspeed for their additional silencer. Link to comment Share on other sites More sharing options...
jackb_ms Posted July 2, 2012 Share Posted July 2, 2012 Hello If I don't have them I cannot use the roll bar, is that what you are saying? ☹️ Could you e-mail me your telephone number please? Jack Edited by - jackb_ms on 2 Jul 2012 14:07:40 Link to comment Share on other sites More sharing options...
Grubbster Posted July 2, 2012 Author Share Posted July 2, 2012 I mailed my phone number Jack, did it get to you OK? Link to comment Share on other sites More sharing options...
Grubbster Posted July 3, 2012 Author Share Posted July 3, 2012 Still available, not suitable for Richard or Jack's cars. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now