yankeedoodoo Posted June 25, 2012 Share Posted June 25, 2012 Met a guy saturday with a CSR260. Beautiful car and he wanted to learn to drive it better. Had a gent with 30 years experience racing 7s ride with him and drive the car. When exiting corners the car had terminal understeer under hard, not even full, acceleration. I'm guessing that this is how the factory stets up the cars to hold down thw lawsuits What might a fella do if he wanted to make the car perform to its potential? Who might peddle such bits and pieces? Is this a common complaint with these top of the line cars? Sheesh! Seems like the factory could offer a better setup with adjustable shocks and collect even more cash from the buyer..... Thankfully, we have after market suppliers! Link to comment Share on other sites More sharing options...
sjmmarsh Posted June 25, 2012 Share Posted June 25, 2012 I don't know what the US spec cars are like, but the UK ones can be adjusted for camber, castor, toe, and have adjustable platforms. It sounds like the one he had was just badly set up. Not difficult to change. Steve Link to comment Share on other sites More sharing options...
Croc Posted June 26, 2012 Share Posted June 26, 2012 No that is not right. My CSR handled well out of the box on the correct UK factory settings applied by Caterham USA through a 4 wheel alignment process. So it is not a lawsuit prevention thing. I think it was either not set up by Caterham USA or someone has been trying to set up the car without the right settings. Most likely it was not built by Caterham USA? Set up specs from Caterham UK used by Caterham USA for CSR260s are a PDF attachment halfway down my build thread page here. They can also set it up with lower ride heights if you are not on the road much. If he wants another CSR260 owner to talk to blatmail me. There are only 9-10 of us in the US. Edited by - Croc on 26 Jun 2012 10:34:37 Link to comment Share on other sites More sharing options...
yankeedoodoo Posted June 26, 2012 Author Share Posted June 26, 2012 Thank you very much for the replies. I learned something and will pass along the info! Link to comment Share on other sites More sharing options...
paul jacobs Posted June 26, 2012 Share Posted June 26, 2012 I would certainly agree with Steve and Croc, the CSR when set up to the factory spec. understeers less than most of the other Seven variants. I was very surprised just how neutral it was when I first took mine onto a track and pushed it in anger [so to speak], very surprised and pleased too. Tell the owner to get the car set up properly by an experienced chassis tuner with the right equipment and the experience to use it, and he will be even more pleased with it. 😬 Paul Link to comment Share on other sites More sharing options...
geko Posted June 29, 2012 Share Posted June 29, 2012 Hi, with the Avon CR500 195/45-15 tyres in front, I found out that to much tyre pressure leads to understeer. And you have to consider that on track under heavy driving the tyre become warmer and the pressure is also higher....maybe a point to think about. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now