Anthony Posted October 23, 2002 Share Posted October 23, 2002 If anyone is looking to carry out a mod as outlined by Dave ( BDR700 ) I have a spare set of rear arms - open to offers Regards Anthony X-Flow-power; the real way forward Link to comment Share on other sites More sharing options...
StewartG Posted October 24, 2002 Share Posted October 24, 2002 Must have missed this one what mod was that? Link to comment Share on other sites More sharing options...
Bricol Posted October 24, 2002 Share Posted October 24, 2002 In-board mounted top radius arms, pivoting through holes in the rear bulkhead I assume. to create enough room for wide wheels/tyres inboard instead of forking out for ridiculously expensive wider rear arches to cover them. And as an added bonus, getting some more roll steer on the de-dion / axle as the angle of the dangle is slightly changed. Good solution I thought - if I've thought the right solution that is - please correct me if I haven't. But what you really need is a spare set of holes as used by BDR700 to take the original arms through the bulkhead. Bri Link to comment Share on other sites More sharing options...
edmandsd Posted October 25, 2002 Share Posted October 25, 2002 Spot on Bri Not enough lateral thinking sometimes............... Home of BDR700 Edited by - edmandsd on 25 Oct 2002 10:54:12 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now