simonpa Posted May 18, 2012 Share Posted May 18, 2012 Looking to retro-fit a K-series and need some bits, such as the fuel flexi connector. Also will need the water rail, engine mounts, etc. Possibly flywheel/clutch/alternator.. Anyone got any of the above (or anything useful)? TIA - Simon Link to comment Share on other sites More sharing options...
Mankee Posted May 18, 2012 Share Posted May 18, 2012 What year of bits do you need, Simon? I have a spare YWB10022 MFRU (EU2), a couple of flywheels (one with a 36-4 180 degres BTDC trigger pattern and another with 36-2 pattern stuck onto the end of a crankshaft ), a few Lucas A127 alternators (Metro 16v K-series fitment) and will have a virtually brand new gearbox mount and some old engine mount rubbers once I get mine swapped for Vibra-Technics items. Link to comment Share on other sites More sharing options...
simonpa Posted May 18, 2012 Author Share Posted May 18, 2012 Ooh - didn't realise there was a difference between EU2/EU3.. I'll probably go Emerald, plus I think my car loom is EU2. I'll mail you! Cheers - Simon Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted May 18, 2012 Leadership Team Share Posted May 18, 2012 Simon, I have a water rail - I'll dig it out when I get home tonight. I bought it on here off another BC'er so whatever I paid for it you can have it for - I'll need to check. Also have an SLR ECU with matching 5AS immobiliser and key fobs if any use? Is this expected to be a standard Supersport engine or TBs etc? Stu. Link to comment Share on other sites More sharing options...
simonpa Posted May 18, 2012 Author Share Posted May 18, 2012 you should both have mail - thanks Gents! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now