jakeandlizzy Posted April 15, 2012 Share Posted April 15, 2012 I have probably 10 or so 1m long 12-13" wide (approx) sheets of carbon fibre that are shiny/glossy one side and more of a matte finish on the other. They are in generally good condition and 1-2mm thick I think. In any case, they are perfect size for replacing the scuttle backplate and lower plate as seen here on my car (was a pretty easy job): There are two types of weaves, diagonal and straight. Sheets look like this: I do not know what they are worth --- but got to be useful for somebody! I want to sell individually as I want to keep at least one for use as brackets/other parts when needed. Not all are perfect, some may have light scratches, but for general purpose use or for the scuttle they are perfect. I have used them for number boards: and brackets as well: BM me offers for them. Finally, a K-series uprated head gasket, never used (obviously). Comes with new steel dowels as well £10+shipping. Edited by - jakeandlizzy on 15 Apr 2012 13:03:49 Edited by - jakeandlizzy on 15 Apr 2012 13:05:24 Edited by - jakeandlizzy on 15 Apr 2012 13:05:58 Link to comment Share on other sites More sharing options...
Lee Fowler Posted April 15, 2012 Share Posted April 15, 2012 YHM. Lee Link to comment Share on other sites More sharing options...
Jason Plato Posted April 15, 2012 Share Posted April 15, 2012 yhm Link to comment Share on other sites More sharing options...
myothercarsa2cv Posted April 15, 2012 Share Posted April 15, 2012 Go on then, YHM Link to comment Share on other sites More sharing options...
TIM 5O Posted April 16, 2012 Share Posted April 16, 2012 yhm Link to comment Share on other sites More sharing options...
Roadru77er Posted April 16, 2012 Share Posted April 16, 2012 jakeandlizzy What are the number boards for, a 7 ? How/where do they fit? or a kart? or single seater? Link to comment Share on other sites More sharing options...
MikeMolloy Posted April 17, 2012 Share Posted April 17, 2012 I need some carbon fibre for a dash modification. Trouble is I only need a small strip (220mm x 45mm). Got any off-cuts? Or, how much for a full sheet (inc. postage)? Link to comment Share on other sites More sharing options...
Mark Piper Posted April 17, 2012 Share Posted April 17, 2012 Lee, I'd take a couple of sheets off of you and collect them...what sort of price are you looking for? Link to comment Share on other sites More sharing options...
AdeC Posted April 28, 2012 Share Posted April 28, 2012 Do you have any Carbon sheets left? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now