willmac Posted March 1, 2012 Share Posted March 1, 2012 Hi All, Just on the off chance someone has had one fabricated and wants to sell. It would be to fit as stated a single diagonal FIA Roll Bar. Or if anyone has drawings of a rack they have had fabricated that they would be kind enough to pass on to me , be great. Many thanks Link to comment Share on other sites More sharing options...
Ivaan Posted March 1, 2012 Share Posted March 1, 2012 I have the very thing sitting in my garage, and a very useful thing it is too. See here If you want to borrow mine, I've not got any use planned for it, for a while. Give me a call on 07855 837 335. Clive Link to comment Share on other sites More sharing options...
StuB Posted March 1, 2012 Share Posted March 1, 2012 Check out Nick Chan's entry under chitchat, think there's the possibility of having a load produced. Link to comment Share on other sites More sharing options...
DaveMorris Posted March 10, 2012 Share Posted March 10, 2012 Will, give me a call on 01691 and we can discuss this. I have one that you could use as a pattern, I have a few bits that are a P.I.T.A. to have fabbed up in small numbers and I also have a couple of drop legs and the clamps which you would need ot make up a rack. I also have some "rough" plans from which these can be made - for different models. As Nick alluded in the Tyre Rack thread last year I was travelling quite a lot last year - and this year is, if anything, worse. So I won't be arranging any mass production. (To be honest last time was a real p.i.t.a. with all the different variants and only resulted in ~£100 going to LRF. They're not the easiest of things to wrap up and ship either ). Looking forward to hearing from you, Dave Edited by - DaveMorris on 10 Mar 2012 20:23:23 Link to comment Share on other sites More sharing options...
DaveMorris Posted March 10, 2012 Share Posted March 10, 2012 Quoting DaveMorris: Will, give me a call on Oswestry 01691 xxxxxxxx(home No. given in Blatmail ) and we can discuss this. I have one that you could use as a pattern, I have a few bits that are a P.I.T.A. to have fabbed up in small numbers and I also have a couple of drop legs and the clamps which you would need ot make up a rack. I also have some "rough" plans from which these can be made - for different models. As Nick alluded in the Tyre Rack thread last year I was travelling quite a lot last year - and this year is, if anything, worse. So I won't be arranging any mass production. (To be honest last time was a real p.i.t.a. with all the different variants and only resulted in ~£100 going to LRF. They're not the easiest of things to wrap up and ship either ). Looking forward to hearing from you, Dave O.K. - so I pressed the wrong button Edited by - DaveMorris on 10 Mar 2012 20:23:43 Link to comment Share on other sites More sharing options...
DaveMorris Posted March 10, 2012 Share Posted March 10, 2012 AAaaarrrgghhhhhhh I have not even been drinking. Link to comment Share on other sites More sharing options...
Area Representative skeetsy Posted March 10, 2012 Area Representative Share Posted March 10, 2012 Hi Willmac, YHM All the best Richard Link to comment Share on other sites More sharing options...
jakeandlizzy Posted April 8, 2012 Share Posted April 8, 2012 I have one here: here Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now