Colin Grundy Posted October 16, 2002 Share Posted October 16, 2002 Simple and probably stupid question. Can someone tell me that whilst fitting the machined down bolts from underneath into the bar, you also fit a spring washer to stop it working loose? The instructions are unclear. I have, and the shockers dont seem to line up with the top mounting holes, I havent tried taking out the washer, but if you do, surely the bolts will vibrate loose. Regards Link to comment Share on other sites More sharing options...
Mike Bees Posted October 16, 2002 Share Posted October 16, 2002 No washers IIRC. If you're really worried about them working loose then use a teeny dab of threadlock. Mike Link to comment Share on other sites More sharing options...
scooby dooby doo Posted October 16, 2002 Share Posted October 16, 2002 I don't think you can use a washer in there because there's not the space. It can't actually fall out because of the damper. But a bit of threadlock might be a good idea. HOOPY Membership Number 4136 R706KGU Link to comment Share on other sites More sharing options...
Colin Grundy Posted October 16, 2002 Author Share Posted October 16, 2002 Cheers for that, heres me bragging that I can fit one in 30mins, and now I have to take the bloody bolts out again. A bit of logic applied before should have made me realise that machining the bolts down in the first place was done for a reason, doh!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now