Jump to content
Click here to contact our helpful office staff ×

Rover ECU/engine loom connector


Englishmaninwales

Recommended Posts

  • Leadership Team

.... and make sure you use a proper crimping tool *thumbup* There's 2 sections to crimp - the section nearest the open end is simply crimped onto the bared wire, the section at the wire end is crimped over both the insulated cable and the waterproof plug - when pushed into the back of the ECU plug the water proof plug will slide in properly. The waterproof plug cannot be pushed into the ECU plug after the connector is in place.

 

Stu.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...