johnv Posted November 16, 2011 Share Posted November 16, 2011 after a pair of normal wing stays (S3 if it makes a difference) thanks Link to comment Share on other sites More sharing options...
alan c Posted November 16, 2011 Share Posted November 16, 2011 I have a set for an S3 but are there different sizes, if so is there a measurement I can take for you to confirm the size? Alan Link to comment Share on other sites More sharing options...
johnv Posted November 16, 2011 Author Share Posted November 16, 2011 do you know what wheel size they were for? I probably want the smallest size, for 13inch wheels? .. otherwise I'll measure something, thanks Link to comment Share on other sites More sharing options...
Krismuss Posted November 16, 2011 Share Posted November 16, 2011 Johny, What sort of condition stays are you looking for? If you're after a 'cheap' set then I have a pair I bought (from a chap on BC) for £20 though they're in the sort of condition you'd expect a £20 pair of wings stays to be in 😬 😳 (i.e. sound but not pretty!) Chris Link to comment Share on other sites More sharing options...
alan c Posted November 16, 2011 Share Posted November 16, 2011 Johny I bought them with a plan to cut them down so did not pay much attention to size. In the end I was told my existing wing stays were better to cut down as they have a flat section in the upright to improve clearance. So I suspect they are "standard" but can measure. I paid £40 - they are not perfect but could but cleaned up easily. Happy to measure and can also take some photos if you want. Alan Link to comment Share on other sites More sharing options...
zetec Posted November 16, 2011 Share Posted November 16, 2011 Wot r you up to?? Link to comment Share on other sites More sharing options...
johnv Posted November 17, 2011 Author Share Posted November 17, 2011 Chris, do you know if yours a for 13 inch wheels? Link to comment Share on other sites More sharing options...
johnv Posted November 17, 2011 Author Share Posted November 17, 2011 Quoting zetec: Wot r you up to?? .. just keeping busy .. Link to comment Share on other sites More sharing options...
Krismuss Posted November 17, 2011 Share Posted November 17, 2011 Yep, standard 13" wheels. I even measured bends, etc. against a few cars at CCS (just to verify that the ones currently on my car aren't standard ) Chris Link to comment Share on other sites More sharing options...
johnv Posted November 17, 2011 Author Share Posted November 17, 2011 ok Chris I'll take them if that's ok, thanks Alan, thanks for the offer, I think Chris's are the right size and I'll get them re-coated anyway Edited by - johnv on 17 Nov 2011 11:03:42 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now