Lee Fowler Posted October 16, 2011 Share Posted October 16, 2011 As above what do you have? Lee Link to comment Share on other sites More sharing options...
LesG Posted October 16, 2011 Share Posted October 16, 2011 I have a Xflow bonnet spare, are the carb holes in the same place? Link to comment Share on other sites More sharing options...
Lee Fowler Posted October 17, 2011 Author Share Posted October 17, 2011 Yes but I think the cut out is further forward. Lee Link to comment Share on other sites More sharing options...
Paul Deslandes Posted October 17, 2011 Share Posted October 17, 2011 Lee if you're going to fit a sausage air filter to the Jenveys you'll need to enlarge the cut out of a standard Vx quite considerably and its goes quite a way forward of the original hole. Pop in and look at mine next time you're up Gomshall way. Paul Link to comment Share on other sites More sharing options...
Lee Fowler Posted October 17, 2011 Author Share Posted October 17, 2011 Thanks Paul, I already have a bonnet with the cut out but when I change exhausts I will need to alter the hole on the new bonnet!! Lee Link to comment Share on other sites More sharing options...
Paul Deslandes Posted October 18, 2011 Share Posted October 18, 2011 ah yes, I forgot about your exhaust outlet. Have you checked with Bruce to see what he can do? Link to comment Share on other sites More sharing options...
Lee Fowler Posted October 18, 2011 Author Share Posted October 18, 2011 Yep JPE I think. Lee Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now