Rear Anti Roll Bar

[Dignity]

Hi All,

Looking for a Rear Anti Roll Bar with fixings for an S3 imperial k series.

 

Thanks

[skeetsy]

Hi Dignity,

 

I may be able to help a bit, I bought a race spec rear anti-roll bar from Miura a while back, and have collected all the bits and bobs to make it fit - only to find that the bar is too narrow for my 2005 chassis.

 

on my car the rear arb mounts under the chassis, I suspect the arb that I have is for an earlier chassis.

 

If this sounds interesting I can run a measure over the bar and let you know the width of the thing.

 

All the best

 

Richard

[Dignity]

Hi Richard,

Since I posted I have found out that I probably want the earlier type (98 car)

So yes sounds interesting

 

Regards

Colin

 

[skeetsy]

Hi Colin,

 

I've taken some measurements and the distance between the centreline of each rubber bush when they are as wide as they can be on the bar is approximately 930mm, obviously if the mounting points on your chassis rails are closer together than this it'll fit without problems.

 

In terms of the bits and bobs I have the following:-

 

Rear arb new and unused as above

Used orange rubber bushes fitted onto bar

Two piece aluminium mounting blocks for each bush and bolts to mount to the chassis (new from Redline)

Used drop links with four new ball joints for each end.

Mounting bushes for connecting drop links to dedion ears and associated bolts

 

I'd have to tot up how much it all owes me, but if it sounds like it will suit your car you can have it for what I paid (circa £100).

 

All the best

 

Richard

 

Edited by - skeetsy on 11 Oct 2011 20:07:48