Bio Posted October 7, 2011 Share Posted October 7, 2011 I have a few VX 2.0 parts after upgrading ... Motronic 2.5 ECU....£20.00 Distributer and cap....£10.00 Standard injectors(set of 4)....20.00 Link to comment Share on other sites More sharing options...
Phil B Posted March 17, 2012 Share Posted March 17, 2012 Hello, Did you manage to sell your standard injectors? If not, do you what the part number on them is please? I am looking for some to go in my Jenvey TBs and have read that the VX 2.0 units may be suitable. I assume it was a 16v engine rather than 8v. Phil Link to comment Share on other sites More sharing options...
Bio Posted March 17, 2012 Author Share Posted March 17, 2012 Hi Phil The injectors are still for sale...They are the standard Beige ones used on the 2.0L XE 16 valve engine. Please refer to the SBD Motorsport site for more details. John Link to comment Share on other sites More sharing options...
Phil B Posted March 19, 2012 Share Posted March 19, 2012 Hello John, Thanks for the reply, I did try to BM you over the weekend. I looked on the SBD website but could not find any details for the standard beige injector. I did find an article about upgrades for the 16v engine which claimed up to 225bhp using the standard injectors. My dilemma is that I have a set of beige Bosch (Ford Zetec) injectors which I am using on my Zetec and I have been told (by Omex and Jenvey) that these beige injectors are limited to 190bhp. So to be sure I don't end up buying another set which have the same flow as what I currently have, could you confirm the injector part number if possible? Bosch numbers start 0280. Thanks, Phil Link to comment Share on other sites More sharing options...
Bio Posted March 19, 2012 Author Share Posted March 19, 2012 Phil, Injectors are Bosch 0280150744, 250cc @ 3.0 bar. Hope that helps. John Link to comment Share on other sites More sharing options...
Phil B Posted March 20, 2012 Share Posted March 20, 2012 John, Thanks, I'll take the injectors please as they should give me the extra flow I will need after porting the head. Would you like to drop me an email to organise payment, postage etc? philblagden(at)aol(dot)com regards, Phil Link to comment Share on other sites More sharing options...
Phil B Posted March 22, 2012 Share Posted March 22, 2012 John, BTTT Tried to contact you via BM to sort out buying injectors, but did not seem to work. Could you call me on 01403 254259 in the evening please? Phil Link to comment Share on other sites More sharing options...
Markiebabes Posted March 22, 2012 Share Posted March 22, 2012 Phil I'll txt John as I know he's out of reach a lot 😬 Link to comment Share on other sites More sharing options...
Phil B Posted March 22, 2012 Share Posted March 22, 2012 Markie, Thanks a lot, I'm not in a rush just wanted complete the deal. Phil B Link to comment Share on other sites More sharing options...
Markiebabes Posted March 22, 2012 Share Posted March 22, 2012 😬 No worries you should get a call tonight Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now