2.3 duratec, all rebuilt

[pluggy]

 

 

Ford Duratec 2.3

 

Used for 6 races in shelsley race car from new, then removed & rebuilt for use in Caterham, with forged pistons & steel rods, this motor is still at the engine builders

 

It made 231BHP @ 6900 RPM & 256 NM of torque, this is with a restrictive standard mondeo exhaust manifold.

We were expecting a further 15 to 20% increase with a proper exhaust manifold

 

Therefore the motor should be good for 260 to 275 BHP with loads of torque

 

 

 

Spec of motor New price (inc VAT)

 

2.3 Duratec ‘crate’ motor £2488.00

 

Ported head £1176.00

 

Cams DUR-01 SBD £552.00

 

Keyed crank mods £200.00

 

Raceline dry sump £954.00

 

Engine mounts £168.00

 

Forged pistons & Rods £1000.00

 

Uprated valve springs £199.20

 

Race spec bearings

 

ARP big end bolts

 

Head stud kit

 

 

 

Total £6737.20

 

 

 

Plus loads of other bits that ive forgotten about, gaskets, bearings, tensioner etc

 

 

This does not include the engine builders labour cost to put it all together

 

 

i no longer have need for this amount of power in a Caterham

 

 

For any further information call Jon 0777 9272918 or 01938 811700 or jonathan@vamplew.plus.com

 

 

THE DEAL:

 

I would rather sell as a complete package, then selling bits off, but will break if enough interest,

Happy to sell with or without raceline dry sump

 

 

 

No silly offers, as this is a serious engine package built with loads of Torque & not peaky power

 

 

 

 

its currently on Ebay Ebay link