Rusty Bolthole Posted September 8, 2011 Share Posted September 8, 2011 Starter Motor - almost new (400 miles tops!) - £50 SOLD Water pump - fairly new - £20 Thermostat housing and pressure cap £10 SOLD Dry sump parts: Mocal 10 row Oil Cooler and mounting brackets - £30 SOLD Mocal sandwich plate (oil filter take off) - £10 Mocal Dry Sump Oil Tank - easyclean, 6 L - £70 SOLD Mocal oil pump £30 SOLD Engine mounts (for dry sump car) £20 SOLD 1Clutch Cable unused - £20 SOLD 1 Clutch cable used - good condition - £10 SOLD Uprated AP Racing clutch cover (see Burton Power website) correct curly finger type- £60 (I send it with the AP Racing uprated clutch plate which has plenty of use left in it here New, unused clutch release bearing - £10 Clutch release fork £10 Gearbox to bellhousing Spacer - £20 SOLD Bellhousing to engine gasket and dirt shield (2 piece) - £10 Unique, modified front timing cover (allows cam timing to be easily adjusted via inspection plate) - must have for racer! - £30 SOLD Edited by - Rusty Bolthole on 12 Sep 2011 22:29:35 Edited by - Rusty Bolthole on 16 Sep 2011 21:05:07 Link to comment Share on other sites More sharing options...
markc Posted September 9, 2011 Share Posted September 9, 2011 Please can I have the 2 Clutch cables and the engine mounts. edit - also the spacer for the gearbox 😬 Blatmail sent with contact details Regards MarkC Edited by - markc on 9 Sep 2011 07:51:32 Link to comment Share on other sites More sharing options...
techbod Posted September 9, 2011 Share Posted September 9, 2011 Gearbox to bellhousing Spacer: If this is the one required for fitting the type 9/5 speed conversion I'd like it please. BM sent Thanks Link to comment Share on other sites More sharing options...
andy couchman Posted September 9, 2011 Share Posted September 9, 2011 Do you have any pics of the front timing cover? Andy Link to comment Share on other sites More sharing options...
Rusty Bolthole Posted September 9, 2011 Author Share Posted September 9, 2011 Mark - email received so I will sort out your bits. Techbod - spacer is correct - Mark seems to have pipped you at this stage, sorry Andy - BM me and I will send you a picture. It also has a bracket mounted on it for the crank sensor (I was running DTA mapped ignition, throttle pot, etc) Link to comment Share on other sites More sharing options...
Lee Fowler Posted September 9, 2011 Share Posted September 9, 2011 YHM. Lee Link to comment Share on other sites More sharing options...
techbod Posted September 9, 2011 Share Posted September 9, 2011 ooops sorry - must have spent so long checking online to see if it was the right part I didn't notice the edit dibs had appeared. Link to comment Share on other sites More sharing options...
LesG Posted September 10, 2011 Share Posted September 10, 2011 Techbod, YHM. Link to comment Share on other sites More sharing options...
Nick T Posted September 16, 2011 Share Posted September 16, 2011 Hi, Do you have an idea of postage costs for the starter moter? Cheers Nick Link to comment Share on other sites More sharing options...
Rusty Bolthole Posted September 16, 2011 Author Share Posted September 16, 2011 Hi Nick, It went earlier this week, sorry. Had not got around to making the edit on my posting Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now