Scott Tully Posted September 29, 2002 Share Posted September 29, 2002 The gear change light on my X-Power 140 bhp does not work. The engine is supposed to rev to 7650rpm and the light come on at 7400rpm. But the rev limiter comes in at 6800rpm. Has anyone else had this problem? I have checked and caterham have put the correct engine in the car, so what could be the problem? Azure Blue SV 1800 K Series GK52OUO. Link to comment Share on other sites More sharing options...
robmar Posted September 29, 2002 Share Posted September 29, 2002 Scott - not sure if this is the answer but I think the standard 1.6/1.8 (115 bhp ish) have a rev limit in this area are you sure you have the correct ECU? does it run fine up to the limiter? rob Link to comment Share on other sites More sharing options...
Scott Tully Posted September 29, 2002 Author Share Posted September 29, 2002 Yes-Rob, it runs perfectly. The rev limiter seems to come in to early. Azure Blue SV 1800 K Series GK52OUO. Link to comment Share on other sites More sharing options...
robmar Posted September 29, 2002 Share Posted September 29, 2002 well I would have thought that if you had the wrong ECU it might not have run as well, although maybe it runs fine with the wrong one. Do you know any other 140 xpower locals that you could try swapping the ecu with? rob Link to comment Share on other sites More sharing options...
Scott Tully Posted September 29, 2002 Author Share Posted September 29, 2002 No, but I will be calling caterham tomorrow to ask their opinion. Azure Blue SV 1800 X-Power 140bhp K Series. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now