Bullman Posted September 27, 2002 Share Posted September 27, 2002 Can anyone suggest where to get a Ford x/flow steel crank ,rods, from.I am aware that Burtons sell them and have their phone no,do you know of any other manufacturers,phone no's or addresses.Thanks Bullman. Bullman Link to comment Share on other sites More sharing options...
cdg Posted September 27, 2002 Share Posted September 27, 2002 John Wilcox in Hinkley manufacture their own steel crankshafts in narrow or wide jouranal. Cheaper than a Farndon crank from Burtons...They can also supply rods to suit. Can't remember their phone no. but I'll dig it out for you. Chris. Ok just looked on John Wilcox' website. There is a whole section on the Crossflow with prices. www.wilcoxengines.demon.co.uk Edited by - cdg on 27 Sep 2002 22:46:33 Link to comment Share on other sites More sharing options...
greg Posted September 27, 2002 Share Posted September 27, 2002 Doug Kidde for Cranks, and Arrows for rods - expensive but I am told you could do alot worse. Greg, Q 86 NTM (Green 185BHP XF) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now