Flyingfish Posted June 17, 2011 Share Posted June 17, 2011 As above. Looking for a dipstick that fits into the screw cap on the bell housing tower. Link to comment Share on other sites More sharing options...
Adrian Williams Posted June 17, 2011 Share Posted June 17, 2011 I think it's the standard item cut down and glued into place. Adrian Link to comment Share on other sites More sharing options...
Flyingfish Posted June 20, 2011 Author Share Posted June 20, 2011 Ah, ok. To what length do you cut the standard one down? Does it just need to touch the bottom of the bell tower? Has anyone got a standard dipstick I can use? Link to comment Share on other sites More sharing options...
Mankee Posted June 20, 2011 Share Posted June 20, 2011 I may have a spare standard dipstick that was given to me by a kind forum user. The end is threatening to break off due to damage during transit, but if you are chopping it down anyway, then this might be ideal for you anyway? Link to comment Share on other sites More sharing options...
Flyingfish Posted June 20, 2011 Author Share Posted June 20, 2011 Hi Mankee. Which end is threatening to come off? If it's just the handle end then i'll take it off your hands if thats ok? Link to comment Share on other sites More sharing options...
Mankee Posted June 20, 2011 Share Posted June 20, 2011 Ah no, it's the oil end. Silly me, I thought you could chop the dipstick down and make an indent to mark the appropriate oil level. Sorry! But you are welcome to have it still though, once I've taken some measurements from it. Link to comment Share on other sites More sharing options...
Adrian Williams Posted June 20, 2011 Share Posted June 20, 2011 I got fed up with it falling out of the cap so welded a strip across the top of it to form a 'T' and put it in the tool box. The strip stops it from falling into the tank when dipping. Mine measures 362mm from the plastic end to the underside of the 'T'. You could make one out of a welding rod or a piece of dowel. Adrian Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now