Support Team Shaun_E Posted May 12, 2011 Support Team Share Posted May 12, 2011 Caterham are out of stock so does anyone know the length of the dry sump belt for use with the "gold" scavenge pump and the standard crankshaft pulley? Mines shredded into little pieces so I can't measure it ☹️ Guessing from the part number it could be 715mm - does that sound right? Edited by - Shaun_E on 12 May 2011 09:20:01 Link to comment Share on other sites More sharing options...
Mark Durrant Posted May 12, 2011 Share Posted May 12, 2011 Try Mick at Redline Components Link to comment Share on other sites More sharing options...
Grubbster Posted May 12, 2011 Share Posted May 12, 2011 Looking at this thread it would seem that 3pk765 is the one, 715 sounds a little short. I'm not home right now so can't check on the car. Link to comment Share on other sites More sharing options...
Mark Durrant Posted May 12, 2011 Share Posted May 12, 2011 Shaun My spare is 3KR763 Mark Link to comment Share on other sites More sharing options...
Team Escargot Posted May 12, 2011 Share Posted May 12, 2011 Shaun Its a Continental Conti-V Multirib part no. 3 PK 765 Nick Link to comment Share on other sites More sharing options...
guilleracing Posted May 14, 2011 Share Posted May 14, 2011 I hope this could be useful to you. I buy dry sump drive belts from Bearing Boys who have an internet site. They seem to be the cheapest available anywhere! They are very helpful and can advise you on the correct size for you installation. Greg. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now