Jump to content
Click here if you are having website access problems ×

Bespoke JPE/HPC/VX Exhaust. Wheels and Tyres and Carbon


kenny.

Recommended Posts

Having a bit of a clearout on stuff I don't think I'll now have a use for. Was going to hoard it all but I hoard too much.

 

Please, if you "dib" follow it up with an email at the same time with a phone number so we can sort it one way or another and not cock it up for other guys who may want the item...I will call back ASAP and in the order of when it was placed........priority will be given to posts on the forum over direct emails.

 

Pick up only please with COD. All items too awkward to post, thanks.

 

Would take a JPE Kevlar low back seat in p/x against any of the below.

 

So here goes.

 

1) Set of minilite style rims. Shod with Toyo 888 GGs. Rims are 6" and 7" and are fitted with 185/60/13 and 205/60/13 respectively.

 

I bought the wheels last year via Blatchat, the fronts are I'm told Minators and the rears are marked Minispeed...............although they are totally matching and identical apart from the width difference.

Condition is excellent although being honest as we are on here if you got your microsope out you would find blemishes............nothing at all to worry about, they are nice, clean, unkerbed and shiney.....I wouldn't have had them on my car if they looked in any way shabby.

 

I had the tyres fitted new 12 months ago and have covered less than three hundred and fifty road miles on them, still soft and squidgy with loads of life as pics show.

 

£400, which is what the tyres cost me.

 

 

http://i416.photobucket.com/albums/pp243/lotusman/JPE%20spares/IMG_0129.jpg

 

http://i416.photobucket.com/albums/pp243/lotusman/JPE%20spares/IMG_0131.jpg

 

 

2) Mog Carbon Half doors...........pic says it all. A few added poppers here and there and a small whitish blemish which looks like is in the layup. Nice and shiny.

£200

 

http://i416.photobucket.com/albums/pp243/lotusman/JPE%20spares/IMG_0132.jpg

 

3) Bespoke exhaust system taken from a JPE. Supplied by Raceco 2 years ago and having done very little mileage the system comprises of the 4 x 1.7/8 primaries, the 4 into 1 collector with a 2.5 inch exit as per the JPE and opposed to the 2 " exit on the HPC, it also comes with built in Lambda boss and plug. Finally there is the big 7.25? inch Raceco titanium can and mounting bracket.

 

It was made with noise reduction as a goal but also for the extra long primaries of the JPE to mate up with one of Ammos silencers without the need for the kink in the collector area, it's a work of art I've got a raceco can on the HPC too and I can honestly say this one is quieter, even when on the JPE.

 

A great looking and performing system. One slight bit of mallet rash around primary number 1 where it meets the collector........it was a bugger to get off and I did mark it. Just rubbed a scotchbrite pad over it and the primaries will shine up well which they should seeing the car has done nothing........can is like new.

 

I'd prefer for anyone who wants this system to come to my house and we'll fit it together and make sure you're 100% happy with it and its performance before you pay, which you will be.

 

Cost over £2100 2 years ago..............looking for circa £1000

 

http://i416.photobucket.com/albums/pp243/lotusman/JPE%20spares/IMG_0116.jpg

 

http://i416.photobucket.com/albums/pp243/lotusman/JPE%20spares/IMG_0136.jpg

 

 

 

Edited by - kenny. on 11 May 2011 16:22:05

 

Edited by - kenny. on 11 May 2011 18:24:27

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...