Drumster Posted May 5, 2011 Share Posted May 5, 2011 That all sounds simple enough, but 2 numpty questions I'm afraid: 1. Does the bottom of the link still remain attached to the ouside of the radius arm? 2. Will I need to adjust the length of the droplink? '92 car with ARB mounted under the inertia reel box (over the diff?). It just seems to me that the droplink will now be at quite an acute angle Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted May 5, 2011 Support Team Share Posted May 5, 2011 Chris - you need to move the droplink onto the inside of the radius arm as well. Then no need to adjust length. 99% certain that is right but I've been fighting with an alternator tonight and celebrated victory with a bottle of red so will need to double check tomorrow. Link to comment Share on other sites More sharing options...
Fishy Dave Posted May 5, 2011 Share Posted May 5, 2011 You are right Shaun, I did this some months ago on the advice of John Chasey to give clearance for 8" wide rims and slicks. Link to comment Share on other sites More sharing options...
Drumster Posted May 6, 2011 Author Share Posted May 6, 2011 Thanks Shaun/Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now