makingff Posted April 24, 2011 Share Posted April 24, 2011 Right. Have bled and lifted and squeezed and filled and everything else I can think of. Hoses are warming nicely. I have replaced the temperature sender and fitted an r500 fan switch. I have a cheap Maplin temp reader which seems to agree with the temp gauge. The car warms up nicely and gets to 80c. It then gradually creeps up whether driven or standing to what appears to be around 95c and never moves from there. Fan kicks in regularly. If I use Maplin temp gauge at the rad inlet it shows around 92c and will be around 5c cooler at the bottom hose. Is this ok? If not, what else should I do? New rad? Simon Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted April 24, 2011 Share Posted April 24, 2011 All sounds very sensible ! Link to comment Share on other sites More sharing options...
Mick Day Posted April 25, 2011 Share Posted April 25, 2011 So I guess you're running an 88 deg C thermostat? If you want it to run cooler then try the 82 deg C option. Link to comment Share on other sites More sharing options...
makingff Posted April 25, 2011 Author Share Posted April 25, 2011 Pretty sure I have an 82 stat fitted (will check last service). So.... If 88 stat that means bottom hose will not warm up until top hose at 88. Therefore, presumably the temperatures I'm seeing aren't really that high? Or are they? Struggling here as to what is 'normal'. It's a 1.8 VVC by the way with an apollo. Simon Link to comment Share on other sites More sharing options...
Slipper man Posted April 26, 2011 Share Posted April 26, 2011 Don't know what is normal on a vvc, but on the R500, the ecu starts to retort the ignition at 84 deg, so over 90 sounds a bit hot to me Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted April 26, 2011 Share Posted April 26, 2011 I have a VVC and recent;ly fitted an 82C thermostat. In the warmer weather of recent days, it runs at about 80C on the gauge. The fan kicks in occasionally after a fast run, or when stuck in traffic. Link to comment Share on other sites More sharing options...
Mr Locust Posted April 26, 2011 Share Posted April 26, 2011 Maplin temp gauge at the rad inlet it shows around 92c and will be around 5c cooler at the bottom hose Its working. Drive it. Link to comment Share on other sites More sharing options...
makingff Posted April 26, 2011 Author Share Posted April 26, 2011 Its working. Drive it. Lol, I do - frequently, all year round. Was out this morning and it seems very consistent at around 90 according to the gauge. Got stuck in traffic (don't you just love the A21...) and still didn't really fluctuate. Maybe I'm just being too cautious but when you see other people's cars seeming to stick at around 80 it makes me wonder why mine doesn't! Think I may drain and refill it this evening to see if that has any effect. Simon Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted April 26, 2011 Share Posted April 26, 2011 I think you have an 88C stat, so it is behaving as it should. Link to comment Share on other sites More sharing options...
Graham King Posted April 26, 2011 Share Posted April 26, 2011 Simon, that will depend on the stat you have fitted. I used to have an 88 degree stat and it used to sit at approx 90 (on the gauge), I have now changed to an 82 degree stat and it now sits at around 80 (on the gauge). In both cases the stat is working as expected and the temp readings are what you would expect. Sorry if that's a case of grandmother and eggs btw. Regards. Graham. Link to comment Share on other sites More sharing options...
Mr Locust Posted April 26, 2011 Share Posted April 26, 2011 Simon, if the gauge is reading a consistent, sensible value and the electric fan cuts in (when stationary) and out (when moving) there shouldn't be any source of concern. If it gives reassurance, my car behaves as yours appears to. The standard thermostat is 88°C. My car is fitted with the standard thermostat and generally stabilises at the 'straight up' 80°C needle position on the gauge. I did a quick check on my car the other day after fitting a new radiator (different saga) and sitting at idle with the nosecone off mine, like yours, was about 92°C in the radiator top tank. Simultaneously the coolant rail adjacent to the gauge sender was 98°C according to the non contact thermometer and the laptop attached to the Emerald ECU (which switches the fan at 98°C on/96°C off). The standard radiator mounted fan switch on my car was a 92°C on/87°C off item so that is consistent with the measured differences at different points of the coolant circuit. Caterham gauges are fine as an indicator of trends but expecting absolute accuracy can be a bit optimistic. Imagine there is a C-----N-----H legend instead. You always have the right time. Until you get a second clock............ Link to comment Share on other sites More sharing options...
makingff Posted April 26, 2011 Author Share Posted April 26, 2011 Thanks everyone. I will just enjoy it and try not to worry about it too much. Simon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now