Jump to content
Click here if you are having website access problems ×

VVC valves, piper springs, hydraulic followers


Shaun_E

Recommended Posts

  • Support Team

Following my engine upgrade I have the following used parts for sale:

Complete set of standard VVC valves (inlet 31.5mm, exhaust 27.3mm). These are in good condition and all straight. £140

Set of Piper single valve springs - £75

Set of VVC hydraulic followers - £100

It's hard to value this stuff so I will consider reasonable offers

Link to comment
Share on other sites

Hmm. I need some Piper springs to take their 285-spec cams in the nearish future. Do you have some steel caps as well? Oh and what sort of mileage have they done and how old are they? I know it shouldn't matter. *smile*

 

Edited by - Mankee on 19 Apr 2011 19:28:03

Link to comment
Share on other sites

  • Support Team

Yes I've got the caps as well. I'll need to check with Dave Andrews exactly what they are but they came off an engine with BP285H cams (hydraulic followers). If they are the right ones then how about £110 for the springs and caps.

They've done about 20k miles over 5 years. The engine had an 8000rpm limit.

Link to comment
Share on other sites

Not to worry about the caps, Shaun. But it's good to know that the standard (VVC I assume?) caps will take many miles and revs with the stiffer valve springs. I'll drop you a note later today about the springs when I get home. *smile*
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...