Jump to content
Click here if you are having website access problems ×

Stack dash temps


The Pikey

Recommended Posts

When the engine is cold (say 10 deg) the Stack oil temp shows 0 deg then a minute or two after start-up the temp goes straight to 12 deg and rises from there on. This does not happen all the time and also applys to the water temp sometimes. I have checked the ground supply to the sensors and all is well. I have also changed one of the sensors and its still the same. The sensors are the big brass two wire type.

 

Anyone got any ideas?

 

Jason

Link to comment
Share on other sites

Hi Jason,

 

The stack sensors only start reading at their bottom limit; the Owners Manual states ...

 

NOTE: The minimum oil and water temperature for which the display gives a true reading is 12°C or 53°F. The unit displays temperatures that are less than this as 0°C or 32°F.

 

HTH

 

Mark

 

 

Link to comment
Share on other sites

Jason, there is a minimum temperature that if and when below the dash would not display. The temperature needs to be above those low limits before it would register. The oil temp would be the same, I cannot remember exactly but thought it was around 20c

*arrowup* *smile*

 

Edited by - Pendennis on 30 Mar 2011 21:21:32

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...