The Pikey Posted March 3, 2011 Share Posted March 3, 2011 A pair of CSR style front wings for a S3. These were made by Carbon Mods for me and are not their usual wet lay-up. It took a good few attempts to make these for me and they really are perfect. They weight next to nothing and are quite rigid too. Cost me £280.00 and are new in the box. Yours for £210 inc post. I have decided to go the std CC route instead. Same as these but pre preg carbon.Sold A Raceline water rail for a Duratec engine. It has had the coil pack arms machined off so only really for use with a coil on plug set-up. It comes with two water outlets, one with a cap on and one without, an alloy bypass fitting and heater take off. Powder coated black. Fitted but never seen water. £145.00 inc post Pair of standard Caterham mirrors. Comes with both the side screen and stanchion fittings. Used for IVA and 100 miles so perfect. £35.00 inc post. Sold. Rover/sigma expansion tank with bracket and cap. Brand new. £25.00 inc post. Sold. Duratec starter. Sold to me as new but it's a recon unit I think. £30.00 inc post. Sold. Pair of imperial radius arms Fitted but never driven with. £38.00 inc post Sold. Cooling fan switch, new. £12.00 inc post Raceline exhaust for the Duratec. This has done only 100 or so miles and since being polished it hasn't been used. It's the proper job, it's a 4-2-1 and all tig welded and made for Raceline by some F1 guys. I didn't use it and went with a Simpsons system with a Cat for IVA. I'm not 100% sure but I think you will need the Raceline engine mounts and maybe a Imperial chassis for this to fit perfectly. It's a work of art but it's going to cost you £850.00 collection only. Jason Edited by - Jason fletcher on 7 Mar 2011 19:48:49 Link to comment Share on other sites More sharing options...
Simon.Rogers1 Posted March 4, 2011 Share Posted March 4, 2011 Jason - YHM Link to comment Share on other sites More sharing options...
martin b Posted March 4, 2011 Share Posted March 4, 2011 Jason If Simon hasn't nabbed the wings could I take them please Martin Link to comment Share on other sites More sharing options...
Simon.Rogers1 Posted March 4, 2011 Share Posted March 4, 2011 Sorry Matey - you need to be quicker off the mark Link to comment Share on other sites More sharing options...
Nick Pargiter Posted March 6, 2011 Share Posted March 6, 2011 Hi Jason I'll take the radius arms Nick Link to comment Share on other sites More sharing options...
The Pikey Posted March 6, 2011 Author Share Posted March 6, 2011 Nick YHM Jason Link to comment Share on other sites More sharing options...
biggles001 Posted March 7, 2011 Share Posted March 7, 2011 Jason, Can I have the expansion tank and the starter please? Steve Link to comment Share on other sites More sharing options...
The Pikey Posted March 7, 2011 Author Share Posted March 7, 2011 Steve YHM jason Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now