CaterBram Posted February 12, 2011 Share Posted February 12, 2011 I've got a ST3309 Stack Stepper Motor temperature gauge, the sensor is a two wire unit connected direct to the gauge by a harness. Has anyone ever fitted a selector switch to one of these to allow both water & temp to be monitored. if so do you need to use a double pole switch & switch both wires or will it work just switching the sense wire and linking the ground wires. Did you use a standard temperature sensor or can you buy spare Stack senders and the plug & wire Link to comment Share on other sites More sharing options...
AndyBram Posted February 12, 2011 Share Posted February 12, 2011 Put another way, has anyone got a k-series with apollo tank where your using a stack temp gauge to monitor water and oil temp on the same gauge 😬 🤔 Link to comment Share on other sites More sharing options...
6speedmanual Posted February 13, 2011 Share Posted February 13, 2011 Would be worth a call to Stack. They are quite helpful on tech enquiries. Peter Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now