The Laddie Posted January 29, 2011 Share Posted January 29, 2011 FIA Roll Bar (Old Style - Single Diagonal) £100+pp Leather Seat & Headrest £150+pp Std Exhaust Manifold £125+pp Exhaust £200+pp Cycle Wings (BRG) & repeaters £50 for pair +pp SOLD Wingstays £35 for pair +pp ON DIBS Oil Pressure Gauge £10+pp SOLD Water Temp Gauge £10+pp SOLD Enjoy, Mike (aka VII SVN) Edited by - The Laddie on 29 Jan 2011 17:08:45 Edited by - The Laddie on 29 Jan 2011 17:09:05 Edited by - The Laddie on 2 Feb 2011 20:57:05 Edited by - The Laddie on 18 Feb 2011 20:41:02 Link to comment Share on other sites More sharing options...
jakeandlizzy Posted January 29, 2011 Share Posted January 29, 2011 In what condition are the wings? Are they for 13" wheels? Link to comment Share on other sites More sharing options...
The Laddie Posted January 29, 2011 Author Share Posted January 29, 2011 I'd say, fine. No obvious cracks and with wiring etc. They are the only wings that CC make, so I reckon they cover all wheels except wide ones. Enjoy, Mike (aka VII SVN) Link to comment Share on other sites More sharing options...
biggles001 Posted January 31, 2011 Share Posted January 31, 2011 Hi, Can you tell the part numbers for the gauges please and what condition they are in? Thanks in advance Steve Link to comment Share on other sites More sharing options...
The Laddie Posted January 31, 2011 Author Share Posted January 31, 2011 @Biggles001 I will have to look on the back of them (that will be tues eve) and see if they have any numbers, but they are the same as I had in my 2006 academy car, and were working fine when taken out. No scratches or other blemishes. Regards Mike Enjoy, Mike (aka VII SVN) Link to comment Share on other sites More sharing options...
The Laddie Posted February 1, 2011 Author Share Posted February 1, 2011 @ Biggles001 The Oil Pressure Gauge is 71252 The Water Temp is 71251 Enjoy, Mike (aka VII SVN) Link to comment Share on other sites More sharing options...
The Pikey Posted February 2, 2011 Share Posted February 2, 2011 Do you know which wing stays they are? I'm after the lower race type. thanks Jason Link to comment Share on other sites More sharing options...
The Laddie Posted February 2, 2011 Author Share Posted February 2, 2011 Sorry Jason, They are not the lowered type Enjoy, Mike (aka VII SVN) Link to comment Share on other sites More sharing options...
biggles001 Posted February 2, 2011 Share Posted February 2, 2011 Mike, Consider the gauges sold please. Thanks Steve Link to comment Share on other sites More sharing options...
The Laddie Posted February 6, 2011 Author Share Posted February 6, 2011 BTTT & Those who are waiting for figures Sorry, Will be done this week Enjoy, Mike (aka VII SVN) Link to comment Share on other sites More sharing options...
awestaco7 Posted February 15, 2011 Share Posted February 15, 2011 Hi Please can you tell be the width of the Seat. I'm looking for the Base part only to use with a foam back (long story), but happy to buy whole seat if the base will fit into a standard width 7. Or if I can cut it down etc. Regards Tony Link to comment Share on other sites More sharing options...
The Laddie Posted February 18, 2011 Author Share Posted February 18, 2011 Hi Tony Sorry for delay. I will measure it this weekend and let you know Regards Mike Link to comment Share on other sites More sharing options...
The Laddie Posted February 19, 2011 Author Share Posted February 19, 2011 Tony, The runners are 12.5 inches (approx 32cm) centre to centre The squab is 16.5 inches at widest part Regards Mike Link to comment Share on other sites More sharing options...
Ian B Posted February 19, 2011 Share Posted February 19, 2011 Mike YHM Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now