pie_boy69 Posted September 9, 2002 Share Posted September 9, 2002 I have a problem on an exhaust after fitting a new subframe and engine mounts the engine sits aprox 1" further forward, resulting in a 1" gap between collector outlet and rearward pipe, Ideally what I need is a sleeve that will fit over and clamp with 2 exhaust clamps one each end. The system is 2 1/4 OD so the sleeve must be in this region if not a little bigger ID this will save the bake bean can temp fix we have at the moment. So any idea where to get one. Cheers Keith Link to comment Share on other sites More sharing options...
F355GTS Posted September 9, 2002 Share Posted September 9, 2002 Give Dave at Powerspeed a shout, he'll probably make it up and ship it in a day Unit 3 Paddocks Farm Bethersden Road Hothfield Nr Ashford Kent TN26 1EP Tel: 01233-662225 Fax: 01233-620889 Email: info@powerspeed.co.uk Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now