C7 Posted September 9, 2002 Share Posted September 9, 2002 I'm after a set of 15inch alloys, and I'd really like to fit Prisoner or HPC alloys. However, my hubs are 100mm PCD so I don't think they're gonna fit cos I think they're 108mm PCD (Ford?). Did they make these wheels in different PCDs, or are there any lookalikes being made anywhere? Advice or website links for suitable alternatives greatly appreciated !! If not I might just have to get Superlites or something.... JimBean Link to comment Share on other sites More sharing options...
C7 Posted September 10, 2002 Author Share Posted September 10, 2002 Still wondering... Guess I could have the hub flanges drilled with a 108mm PCD....is this recommended ? Link to comment Share on other sites More sharing options...
scooby dooby doo Posted September 10, 2002 Share Posted September 10, 2002 I *think* adapter plates can be made up - not sure how well they work, whether they're recommended etc... HOOPY R706KGU CYCLE WINGS AEROSCREEN K SERIES CUCUMBER Link to comment Share on other sites More sharing options...
Violet Elizabeth Posted September 10, 2002 Share Posted September 10, 2002 As far as I know I am the only owner of geniune Ital PCD Prisoners. And they were specialy made , but not sure how. Sorry. Edited by - Noger on 10 Sep 2002 16:47:50 Link to comment Share on other sites More sharing options...
murph7355 Posted September 10, 2002 Share Posted September 10, 2002 I'm pretty sure you can buy adapter plates to change the PCD, but it never sounds right to me to add stuff in this area (spacers, adapters, whatever). DT (the road oriented one) will probably do them. Link to comment Share on other sites More sharing options...
scooby dooby doo Posted September 10, 2002 Share Posted September 10, 2002 Agree with Andy. I think its possible but it "feels" nasty to me... HOOPY R706KGU CYCLE WINGS AEROSCREEN K SERIES CUCUMBER Link to comment Share on other sites More sharing options...
Violet Elizabeth Posted September 11, 2002 Share Posted September 11, 2002 Mine are cast (?) with the Ital PCD. Link to comment Share on other sites More sharing options...
C7 Posted September 11, 2002 Author Share Posted September 11, 2002 Thanks to all for your replies - it's a tricky one I know !! I'd have to admit, adapters and the like worry me. Noger - that's very teasing info about your wheels, just a shame we can't dig up any more info on them ! Maybe someone knows of an aftermarket wheel that's very similar in design to a Prisoner? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now