Mike Guest Posted October 10, 2010 Share Posted October 10, 2010 POBC, I am wondering if anyone has one of these which I could borrow: Lift the Dot Punch Postage each way will be paid by me and a small donation to NTL. Only need to fit a couple of LTD fasteners which makes purchasing the punch seem expensive ! Or is there another way of fitting them to a tonneau ? Best regards, Mike. Link to comment Share on other sites More sharing options...
tbird Posted October 10, 2010 Share Posted October 10, 2010 are the two fasteners in such a position that you could swap for Tenax, and still be symmetrical, imho a nicer fastener and easier to fit, other than that if you have a hood maker/car trimmer near you they might punch the holes for you either FOC or for a small fee, still cheaper than buying a punch, more risky strategy, make a hole cutter from an old piece steel tube (or buy something like this) and cut slits with sharpened screwdriver Tim CSR 200 Aztec and Black Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now