andy_h Posted September 21, 2010 Share Posted September 21, 2010 I'm looking for a spare wheel for my BJ twin axle trailer (my original spare wheel was nicked). Current tyre size is 145R10 Radial. PCD on adjacent studs measures 73mm PCD on opposite studs measures about 110mm (about as the hub nut sticks out so a bit difficult to get acurate measure). If you have the mounting bracket that would be great too. Edited to add PCD. Cheers, Andy White road legal 2.0 HPC VX race car - Now all shiney and new 😬 Edited by - andy_h on 26 Sep 2010 21:18:07 Link to comment Share on other sites More sharing options...
shn7 Posted September 22, 2010 Share Posted September 22, 2010 Andy, What pcd do you need? I have one that I bought in error before then selling my trailer. In fact I have a bare rim and a rim with tyre. Steve. Not forgetting Percy the Polar Bear who recommends Puddle Pet Care Link to comment Share on other sites More sharing options...
andy_h Posted September 23, 2010 Author Share Posted September 23, 2010 Hi Steve, My PCD calculates out at 103.222 (73mm between centres of two adjacent studs, multiplied by 1.414). Cheers, Andy White road legal 2.0 HPC VX race car - Now all shiney and new 😬 Link to comment Share on other sites More sharing options...
shn7 Posted September 24, 2010 Share Posted September 24, 2010 Not sure about those calculations but having measured between diametrically opposing centres on the wheels I have it looks like 3.75" (sorry old school imperial 😬). They were off a Minno so if you have a Minno most likely correct. If this fits would you want bare rim, rim+tyre or both? I also have a spare wheel mounting bracket. Give me a call on 07771 907 four oh one if you want to chat about it. Steve. Not forgetting Percy the Polar Bear who recommends Puddle Pet Care Link to comment Share on other sites More sharing options...
andy_h Posted September 24, 2010 Author Share Posted September 24, 2010 Hi Steve, Ok, I'll measure again tonight using opposing studs, in old skool... tut, kids adults these days huh... 😬 White road legal 2.0 HPC VX race car - Now all shiney and new 😬 Link to comment Share on other sites More sharing options...
andy_h Posted September 24, 2010 Author Share Posted September 24, 2010 Sorry, meant to add yes please if suitable, I'd like rim with tyre, and the mounting bracket. What type of bracket is it, and where is it normally mounted (outside of trailer side upright)? White road legal 2.0 HPC VX race car - Now all shiney and new 😬 Link to comment Share on other sites More sharing options...
andy_h Posted September 26, 2010 Author Share Posted September 26, 2010 BTTT.... As Steve's was a different size (thanks anyway Steve ). White road legal 2.0 HPC VX race car - Now all shiney and new 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now