Phil Posted September 13, 2010 Share Posted September 13, 2010 I have a 1990 car with a cooling catch tank in the engine bay near the passenger front wheel, I notice that some 7s have a header tank under the nose at the front with a sealed system. Is it possible to change my set up to this system? My car is an old crossflow converted to Zetec. FreeRange7 http://good-times.webshots.com/photo/2404840560089816983khvSRw Link to comment Share on other sites More sharing options...
James-Seven Posted September 13, 2010 Share Posted September 13, 2010 Contact James Whiting, he converted my crossflow with great results Link to comment Share on other sites More sharing options...
Phil Posted September 13, 2010 Author Share Posted September 13, 2010 Thanks but i would like to do the job myself and not hassle James as I do not live near him. Any Help/ pictures? FreeRange7 http://good-times.webshots.com/photo/2404840560089816983khvSRw Edited by - phil on 13 Sep 2010 23:32:44 Link to comment Share on other sites More sharing options...
Paul Formston Posted September 14, 2010 Share Posted September 14, 2010 Hi Phil, its not hard I fitted a sealed system to my Zetec, all you need is some parts I put a pipe with a Small dia pipe 3/8, as the bottom hose across the front which came from caterham part number(73155 cooling submarine Rover Dri sump) then mounted the header tank in its normal place under the nose cone and put a 3/8 pipe down to the bottom hose, with a T peace in it for the heater (if need one I did,) then I Changed the pressure cap for a blanking cap and ran a pipe 1/4 dia (I think) to the small pipe on the header tank If you would like some pictures send me you mob number and I will send them to you Regards Paul 07970 663442 North Wales Sports Cars caring for Caterhams in North Wales. Dodge Viper blue Zetec Caterham Edited by - Paul Formston on 14 Sep 2010 09:31:13 Link to comment Share on other sites More sharing options...
DohNut Posted September 14, 2010 Share Posted September 14, 2010 If I remember correctly, the basics of the system are simply introduce a water reservoir in between the engine and the pressure cap. Change the radiator cap for a blank that allows free flow of water out of the thermostat housing overflow pipe. Put a small diameter pipe between the over flow and the new header tank. Put the radiator cap on the header tank The expanding water/air should then pass freely out of the thermostat housing via the over flow down the small pipe and into the bottom of the header tank, pressurising the air above it until/if the pressure of the radiator cap is exceeded. FWIW I have the header tank fitted above the gearbox or on the heater (if it is in the car) Nick Link to comment Share on other sites More sharing options...
Graham Perry Posted September 14, 2010 Share Posted September 14, 2010 There is some stuff in the archive about this iirc Edited by - Graham Perry on 14 Sep 2010 20:33:06 Link to comment Share on other sites More sharing options...
CaterBram Posted September 14, 2010 Share Posted September 14, 2010 Check out here The existing thermostat tower & vent can be replaced by Fiesta Thermostat housing Q469 WET, 1990 1690 Xflow Long Cockpit in Ali except for the red bits. .CaterBram on Facebook Link to comment Share on other sites More sharing options...
fatal3rror Posted October 10, 2017 Share Posted October 10, 2017 Sorry for bringing up this old thread but for some reason, none of the forum links seem to work for me! Any instructions on converting into a sealed system would be much appreciated! Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted October 10, 2017 Member Share Posted October 10, 2017 Sorry for bringing up this old thread but for some reason, none of the forum links seem to work for me! It isn't you: links were lost in the transition of the web site.Jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now