k80rum Posted September 9, 2010 Share Posted September 9, 2010 The last bits & bobs knocking about in the garage are up for sale: Job lot of Mikalor clamps, all in very good condition. These clamps are the the best (Supra W4) versions which Mikalor make and were bought from Stagonset earlier this year. The main band and band arch are made from 304 grade stainless steel which is superior to the 302 grade used on the W2 versions of these clamps. I have for sale; 11 x 40-43mm (retailing at £5.39 each) 1 x 25-27mm (retailing at £4.20 each) 2 x 23-25mm (retailing at £4.15 each) 1 x 21-23mm (retailing at £4.08 each) 1 x 17-19mm (retailing at £3.97 each) In total over £94 (Inc-VAT) worth of clamps £45 Caterham Series 3 (non-SV) boot tonneau cover in good condition with no rips or tears. Currently retails at £92.83 in the online store. I'm including my fitting kit in case it's useful too. It consists of a number of bases, silver poppers, black poppers and the tools to fit them. £45 Catflash by Chris Wyles, complete with installation instructions £100 CC K series header tank in good condition 'round type' £15 1L Valvoline 75w90 LS gear oil for limited slip diff £10 1L Comma 80w90 LS gear oil for limited slip diff £5 8L Castrol 'GTX High Mileage' 15w40 £30 5L Comma Xstream G30 red antifreeze £10 Rover K series RHS engine mount £5 ALL PRICES ARE COLLECTION FROM CAMBERLEY Darren E K80 RUM Website and Emerald maps library Edited by - k80rum on 3 Feb 2011 19:33:45 Link to comment Share on other sites More sharing options...
Leadership Team robj Posted September 9, 2010 Leadership Team Share Posted September 9, 2010 I am very interested in the wheels, I will PM, Robert Link to comment Share on other sites More sharing options...
k80rum Posted September 9, 2010 Author Share Posted September 9, 2010 Thanks Robert. PM received and replied to Darren E K80 RUM Website and Emerald maps library Link to comment Share on other sites More sharing options...
Z3MCJez Posted September 9, 2010 Share Posted September 9, 2010 I will take the boot cover if it has not been drilled to take harnesses (I have HANS fitment, so holes not in standard places) and if it's for use without hoodsticks. Otherwise, I'll leave it for someone else. Thanks, Jez Build Photos Link to comment Share on other sites More sharing options...
jackb_ms Posted September 9, 2010 Share Posted September 9, 2010 Darren Can I have the set of four, 32mm billet aluminium hose joiners. You don't have a submarine pipe by any chance? 😬 Cheers Jack Emily, The Very Yellow 21 PS: which are they? Can I drill and tap hole on them? Edited by - jackb_ms on 9 Sep 2010 21:09:48 Link to comment Share on other sites More sharing options...
GPBox Posted September 10, 2010 Share Posted September 10, 2010 Hi, BM also sent about 561 wheel....have also sent Rob a BM as he's first out of the blocks... cheers Graham Link to comment Share on other sites More sharing options...
Ivaan Posted September 10, 2010 Share Posted September 10, 2010 Can I take the black silencer heatsheild please. Could it be posted? Many thanks, Clive Edited by - Ivaan on 10 Sep 2010 09:12:07 Link to comment Share on other sites More sharing options...
k80rum Posted September 10, 2010 Author Share Posted September 10, 2010 Jez: Nope, boot cover has not been drilled to take harnesses, it's fitted with poppers already but always went over the top of my harness mounts. My car never had a hood so I don't think it'll be a hoodsticks version. Is there a way I can confirm? I can PM you some photos if they"re helpful.. Clive: It certainly could, it'll just depend on whether you find the cost acceptable. I'll get back to you with the cheapest quote I can find. I'm presuming it'd be going within the UK? Graham: Should be fine, Rob was inquiring after the road wheels rather than the steering wheels . Postage is likely to be about £3.50 if that sounds okay? Darren E K80 RUM Website and Emerald maps library Link to comment Share on other sites More sharing options...
GPBox Posted September 10, 2010 Share Posted September 10, 2010 Great, I'll BM you for details....cheers G Link to comment Share on other sites More sharing options...
GPBox Posted September 12, 2010 Share Posted September 12, 2010 Darren, £ xfer done....cheers Graham Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now