andy oliver Posted September 2, 2002 Share Posted September 2, 2002 I have the old brass thick type radiator.I have had to hammer dents into the raised corners where the top and bottom hoses fit to stop it contacting the nosecone.I was wondering if the aluminium radiator has this problem as it might be a more elegant solution. Link to comment Share on other sites More sharing options...
I reply to every thread Posted September 2, 2002 Share Posted September 2, 2002 I don't know the dimensions but my old brass rad rubbed whereas my ally one doesn't. Link to comment Share on other sites More sharing options...
scooby dooby doo Posted September 2, 2002 Share Posted September 2, 2002 the 3" thick ali race radiator has the corners chopped off - ie there's about 1.5" at 45 degrees to the sides. so theres a fair bit of clearance there. not sure about the thin/normal rad. HOOPY CYCLE WINGS CUCUMBER Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now