Dave B Posted July 13, 2010 Share Posted July 13, 2010 Got a bit of a dribble from inlet manifold around no 4 cylinder. As this seems to be above HG I am assuming that it is a case of taking off inlet manifold, new gasket and tighten up. Any words from the wise??? Dave B Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted July 13, 2010 Share Posted July 13, 2010 What engine ? Link to comment Share on other sites More sharing options...
Dave B Posted July 13, 2010 Author Share Posted July 13, 2010 Oops K series 1600 Dave B Link to comment Share on other sites More sharing options...
Mick Day Posted July 14, 2010 Share Posted July 14, 2010 have a look here about half way down the page. Link to comment Share on other sites More sharing options...
Dave B Posted July 14, 2010 Author Share Posted July 14, 2010 Thanks Mick, a good reference. JUst need to see if I can get the correct gasket over here in Gran Canaria. Dave B Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted July 14, 2010 Share Posted July 14, 2010 Can get one from CC and post it to you if it helps ? Link to comment Share on other sites More sharing options...
Dave B Posted July 14, 2010 Author Share Posted July 14, 2010 Many thanks SM25T. I will have a go here and let you know if I cant source one. Dave B Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted July 14, 2010 Share Posted July 14, 2010 I am around this Thurs/Fri and can collect from CC Dartford, but away Mon - Weds next week. Link to comment Share on other sites More sharing options...
Dave B Posted July 15, 2010 Author Share Posted July 15, 2010 Managed to find a gasket locally but thanks SM25T for the kind offer. Does anyone have advice on which gasket goo to use or is it not necessary. Nice little weekend jobby in the 38c plus temperatures at the moment. Dave B Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted July 15, 2010 Share Posted July 15, 2010 Don't want any goo on the inlet manifold gasket ... just make sure all mating faces/grooves are spotless ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now